Precision Digital Power Monitor
ISL28022
Features
The ISL28022 is a bi-directional high-side and low-side digital
current sense and voltage monitor with serial interface. The
device monitors current and voltage and provides the results
digitally along with calculated power. The ISL28022 provides
tight accuracy of less than 0.3% for both voltage and current
monitoring over the entire input range. The digital power
monitor has configurable fault thresholds and measurable
ADC gain ranges.
• Bus voltage sense range . . . . . . . . . . . . . . . . . . . . . . 0V to 60V
• 16-bit ∑∆ADC monitors current and voltage
• Voltage measuring error . . . . . . . . . . . . . . . . . . . . . . . . . <0.3%
• Current measuring error . . . . . . . . . . . . . . . . . . . . . . . . . <0.3%
• Handles negative system voltage
• Over/undervoltage and current fault monitoring
2
• I C/SMBus interface
The ISL28022 handles common-mode input voltage ranging
from 0V to 60V. The wide range permits the device to handle
telecom, automotive and industrial applications with minimal
external circuitry. Both high and low-side ground sensing
applications are easily handled with the flexible architecture.
• Wide V range . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3V to 5.5V
CC
• ESD (HBM). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8kV
2
• Supports high speed I C . . . . . . . . . . . . . . . . . . . . . . . 3.4MHz
The ISL28022 consumes an average current of just 700µA
and is available in the space saving 10 Ld MSOP package. The
ISL28022 is also offered in a 16 Ld QFN package. The part
operates over the extended temperature range from -40°C to
+125°C.
Applications
• Routers and servers
• DC/DC, AC/DC converters
• Battery management/charging
• Automotive power
• Power distribution
• Medical and test equipment
VCC
VIN = 0V TO 60V
VBUS
VINP
GND
ADC
16-Bit
VINM
SMBCLK/SCL
SMBDAT/SDA
Voltage
VOUT
Regulator
REG
MAP
VCC
A0
A1
EN
ECLK/INT
FIGURE 1. TYPICAL APPLICATION
April 26, 2013
FN8386.1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 |Copyright Intersil Americas LLC 2013. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.
1