Programmable V
Calibrator with EEPROM
COM
ISL24202
Features
The ISL24202 is an 8-bit programmable current sink that can be
used in conjunction with an external voltage divider to generate a
• Adjustable 8-Bit, 256-Step, Current Sink Output
• On-Chip 8-Bit EEPROM
voltage source (V
) positioned between the analog supply
COM
• Up/Down Counter Interface
voltage and ground. The current sink’s full-scale range is
controlled by an external resistor, R . With the appropriate
• Guaranteed Monotonic Over-Temperature
SET
choice of external resistors R and R , the V
COM
voltage range
1
2
• 4.5V to 19.0V Analog Supply Range for Normal Operation
(10.8V Minimum Analog Supply Voltage for Programming)
can be controlled between any arbitrary voltage range. The
ISL24202 has an 8-bit data register and 8-bit EEPROM for storing
both a volatile and a permanent value for its output, accessible
through a single up/down counter interface pin (CTL). After the
• 2.25V to 3.6V Logic Supply Voltage Operating Range
• Pb-free (RoHS-Compliant)
part is programmed with the desired V
value, the Counter
COM
• Ultra-Thin 8 Ld TDFN (3 x 3 x 0.8mm Max)
Enable pin (CE) can be grounded to prevent further changes. On
every power-up the EEPROM contents are automatically
transferred to the data register, and the pre-programmed output
Applications
• LCD Panel V
Generator
voltage appears at the V
pin.
COM
OUT
• Electrophoretic Display V
Generator
COM
The ISL24202 can be used with a high output drive buffer
amplifier, which allows it to directly drive the V
LCD panel.
input of an
COM
Related Literature
• See AN1633 for ISL24202 Evaluation Board Application Note
“ISL24202IRTZ-EVALZ Evaluation Board User Guide” (Coming
Soon)
The ISL24202 is available in an 8 Ld 3mm x 3mm TDFN
package. This package has a maximum height of 0.8mm for very
low profile designs. The ambient operating temperature range is
-40°C to +85°C.
VDD
AVDD
5
2
6
R1
R2
CTL
LCD PANEL
I/O PIN*
1
MICRO-
CONTROLLER
OUT
7
ISL24202
VCOM
I/O PIN
CE
8
SET
EL5411T
RSET
4
* 0, 1, TRI-STATE
FIGURE 1. TYPICAL ISL24202 APPLICATION
March 15, 2011
FN7587.0
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 |Copyright Intersil Americas Inc. 2011. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.
1