PRELIMINARY
Data Sheet No. PD60272
IRS2136/IRS21362/IRS21363/IRS21365/
IRS21366/IRS21367/IRS21368 (J&S) PbF
3-PHASE BRIDGE DRIVER
Packages
Features
•
•
•
•
Floating channel designed for bootstrap operation
Fully operational to +600 V
Tolerant to negative transient voltage, dV/dt immune
Gate drive supply range from 10 V to 20 V (IRS2136/
IRS21368), 11.5 V to 20 V (IRS21362), or 12 V to 20 V
(IRS21363/IRS21365/IRS21366/IRS21367
Undervoltage lockout for all channels
28-Lead SOIC
28-Lead PDIP
•
•
•
•
•
•
Over-current shutdown turns off all six drivers
Independent 3 half-bridge drivers
Matched propagation delay for all channels
Cross-conduction prevention logic
44-Lead PLCC w/o 12 Leads
Low side output out of phase with inputs. High side outputs
out of phase (IRS213(6,63, 65, 66, 67, 68)), or in phase
(IRS21362) with inputs
Applications:
•
•
•
•
3.3 V logic compatible
*Motor Control
Lower di/dt gate drive for better noise immunity
Externally programmable delay for automatic fault clear
All parts are LEAD-FREE
*Air Conditioners/ Washing Machines
*General Purpose Inverters
*Micro/Mini Inverter Drives
Description
The IRS2136x are high voltage, high
speed power MOSFET and IGBT driver with
three independent high side and low side
referenced output channels for 3-phase
applications. Proprietary HVIC technology
enables ruggedized monolithic construction.
Logic inputs are compatible with CMOS or
LSTTL outputs, down to 3.3 V logic. A current
trip function which terminates all six outputs
can be derived from an external current sense
resistor. An enable function is available to
terminate all six outputs simultaneously. An
open-drain FAULT signal is provided to
Feature Comparison: IRS2136x
Part
IRS2136
IRS21362
IRS21363
IRS21365
IRS21366
IRS21367
IRS21368
___ ___
HIN, LIN
___
HIN, LIN
___ ___
HIN, LIN
___ ___
HIN, LIN
___ ___
HIN, LIN
___ ___
HIN, LIN
___ ___
HIN, LIN
Input Logic
ton (typ.)
toff (typ.)
530 ns
530 ns
530 ns
530 ns
530 ns
530 ns
530 ns
530 ns
200 ns
200 ns
200 ns
200 ns
530 ns
530 ns
VIH (min.)
VIL (max.)
VITRIP+
2.5 V
0.8 V
2.5 V
0.8 V
2.5 V
0.8 V
2.5 V
0.8 V
4.3 V
2.5 V
0.8 V
2.5 V
0.8 V
4.3 V
2.5 V
0.8 V
4.3 V
0.46 V
0.46 V
0.46 V
0.46 V
VCCUV+
VBSUV+
/
8.9 V
8.2 V
10.4 V
9.4 V
11.1 V
10.9 V
11.1 V
10.9 V
11.1 V
10.9 V
11.1 V
10.9 V
8.9 V
8.2 V
VCCUV-
/
VBSUV-
indicate that an overcurrent or undervoltage shutdown has occurred. Overcurrent fault conditions are cleared automatically after a
delay programmed externally via an RC network connected to the RCIN input. The output drivers feature a high pulse current buffer
stage designed for minimum driver cross-conduction. Propagation delays are matched to simplify use in high frequency applications.
The floating channels can be used to drive N-channel power MOSFETs or IGBTs in the high side configuration which operates up to
600 V.
Typical Connection
www.irf.com
1