Data ShIeRet N1o1. P5D060S23(0PrbevFAa)
IR1150IS(PbF)
µPFC ONE CYCLE CONTROL PFC IC
Features
• Open loop protection
•
PFC with IR proprietary “One Cycle Control”
• Maximum duty cycle limit of 98%
• Continuous conduction mode (CCM) boost type PFC
• No line voltage sense required
•
•
User programmable fixed frequency operation
Min. off time of 150-350ns over freq range
•
Programmable switching frequency (50kHz-200kHz)
CC
• V under voltage lockout
• Internally clamped 13V gate drive
• Fast 1.5A peak gate drive
• Programmable output overvoltage protection
•
•
•
Brownout and output undervoltage protection
Cycle-by-cycle peak current limit
Soft start
•
Micropower startup (<200 µA)
• Latch immunity and ESD protection
• Parts also available Lead-Free
• User initiated micropower “Sleep Mode”
Description
Package
The µPFC IR1150 is a power factor correction (PFC) control IC designed to operate in continuous
conduction mode (CCM) over a wide range input line voltages. The IR1150 is based on IR's
proprietary "One Cycle Control" (OCC) technique providing a cost effective solution for PFC.
The proprietary control method allows major reductions in component count, PCB area and
design time while delivering the same high system performance as traditional solutions.
The IC is fully protected and eliminates the often noise sensitive line voltage sensing requirements
of existing solutions.
The IR1150 features include programmable switching frequency, programmable dedicated
over voltage protection, soft start, cycle-by-cycle peak current limit, brownout, open loop,
UVLO and micropower startup current.
8-Lead SOIC
In addition, for low standby power requirements (Energy Star, 1W Standby, Blue Angel, etc.), the IC can be driven into sleep
mode with total current consumption below 200µA, by pulling the OVP pin below 0.62V.
IR1150 Application Diagram
V OUT
BRIDGE
AC LINE
+
V cc
AC NEUTRAL
IR1150
1
2
3
4
8
7
6
5
COM
FREQ
ISNS
OVP
GATE
VCC
VFB
COMP
+
RTN
www.irf.com
1