INA226
www.ti.com
SBOS547 –JUNE 2011
High-or Low-Side Measurement,
Bi-Directional CURRENT/POWER MONITOR with I2C™ Interface
Check for Samples: INA226
1
FEATURES
DESCRIPTION
The INA226 is a current shunt and power monitor
with an I2C interface. The INA226 monitors both a
shunt voltage drop and bus supply voltage.
Programmable calibration value, conversion times,
and averaging, combined with an internal multiplier,
enable direct readouts of current in amperes and
power in watts.
23
•
SENSES BUS VOLTAGES FROM 0V TO +36V
HIGH- OR LOW-SIDE SENSING
REPORTS CURRENT, VOLTAGE, AND POWER
HIGH ACCURACY:
•
•
•
–
–
0.1% Gain Error (Max)
10μV Offset (Max)
•
•
•
•
CONFIGURABLE AVERAGING OPTIONS
16 PROGRAMMABLE ADDRESSES
OPERATES FROM 2.7 to 5.5V POWER SUPPLY
MSOP-10 PACKAGE
The INA226 senses current on buses that can vary
from 0V to +36V, while the device obtains its power
from a single +2.7V to +5.5V supply, drawing a
typical of 330μA of supply current. The INA226 is
specified over the operating temperature range
of –40°C to +125°C. The I2C interface features 16
programmable addresses.
APPLICATIONS
•
•
•
•
•
•
•
SERVERS
TELECOM EQUIPMENT
COMPUTERS
POWER MANAGEMENT
BATTERY CHARGERS
POWER SUPPLIES
TEST EQUIPMENT
RELATED PRODUCTS
DESCRIPTION
DEVICE
Current/Power Monitor with Watchdog, Peak-Hold,
and Fast Comparator Functions
INA209
INA210, INA211,
INA212, INA213,
INA214
Zerø-Drift, Low-Cost, Analog Current Shunt Monitor
Series in Small Package
Zerø-Drift, Bi-Directional Current Power Monitor with
INA219
INA220
Two-Wire Interface
High or Low Side, Bi-Directional Current/Power
Monitor with Two-Wire Interface
Power Supply
(0V to 36V)
CBYPASS
0.1mF
VS
VBUS
High-
Side
Shunt
(Supply Voltage)
INA226
SDA
SCL
Power Register
´
Load
V
I
I2C
Interface
Current Register
ADC
Low-
Side
Shunt
Alert
Voltage Register
A0
A1
Alert Register
GND
High-or Low-Side Sensing
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
3
I2C is a trademark of NXP Semiconductors.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2011, Texas Instruments Incorporated