INA228
INA228
www.ti.com
SLYS021 – JANUARY 2021
SLYS021 – JANUARY 2021
INA228 85-V, 20-Bit, Ultra-Precise Power/Energy/Charge Monitor With I2C Interface
1 Features
3 Description
•
•
High-resolution, 20-bit delta-sigma ADC
Current monitoring accuracy:
The INA228 is an ultra-precise digital power monitor
with a 20-bit delta-sigma ADC specifically designed
for current-sensing applications. The device can
measure a full-scale differential input of ±163.84 mV
or ±40.96 mV across a resistive shunt sense element
with common-mode voltage support from –0.3 V to
+85 V.
– Offset voltage: ±1 µV (maximum)
– Offset drift: ±0.01 µV/°C (maximum)
– Gain error: ±0.05% (maximum)
– Gain error drift: ±20 ppm/°C (maximum)
– Common mode rejection: 154 dB (minimum)
Power monitoring accuracy:
– 0.5 % full scale, –40 °C to 125 °C (maximum)
Energy and Charge accuracy:
– 1.0 % full scale (maximum)
The INA228 reports current, bus voltage, temperature,
power, energy and charge accumulation while
employing a precision ±0.5 % integrated oscillator, all
while performing the needed calculations in the
background. The integrated temperature sensor is ±1
°C accurate for die temperature measurement and is
useful in monitoring the system ambient temperature.
•
•
•
•
•
•
Fast Alert response: 75 μs
Wide common-mode range: –0.3 V to +85 V
Bus voltage sense input: 0 V to 85 V
Shunt full-scale differential range:
The low offset and gain drift design of the INA228
allows it to be used in precise systems that do not
±163.84 mV / ± 40.96 mV
undergo
multi-temperature
calibration
during
•
•
•
•
•
Input bias current: 2.5 nA (maximum)
Temperature sensor: ±1 °C (maximum at 25 °C)
Programmable resistor temperature compensation
Programmable conversion time and averaging
2.94-MHz High-Speed I2C interface with 16 pin-
selectable addresses
Operates from a 2.7-V to 5.5-V supply
– Operational current: 640 µA (typical)
– Shutdown current: 5 µA (maximum)
manufacturing. Further, the very low offset voltage
and noise allow for use in mA to kA sensing
applications and provide a wide dynamic range
without significant power dissipation losses on the
sensing shunt element. The low input bias current of
the device permits the use of larger current-sense
resistors,
thus
providing
accurate
current
•
measurements in the micro-amp range.
The device allows for selectable ADC conversion
times from 50 µs to 4.12 ms as well as sample
averaging from 1x to 1024x which further helps
reduce the noise of the measured data.
2 Applications
•
•
•
•
•
DC-DC converters and power inverters
Industrial battery packs
Power-over-Ethernet (PoE)
Telecom equipment
Device Information (1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
INA228
VSSOP (10)
3.00 mm × 3.00 mm
Enterprise servers
(1) For all available packages, see the package option
addendum at the end of the data sheet.
VS
Power
Reference
IN+
IN-
SCL
Voltage Current
SDA
Power Energy
20 Bit
ADC
I2C
MUX
A0
VBUS
Charge
Temp
A1
+
Oscillator
Out-of-range
Threshold
ALERT
œ
GND
Simplified Block Diagram
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
Product Folder Links: INA228
Copyright © 2021 Texas Instruments Incorporated
Submit Document Feedback
1