MEMS Oscillator, Ultra Performance, High Freq., LVCMOS/ HCMOS Compatible, 80.0 MHz to 220.0MHz
IM811 Series
Features:
Typical Applications:
MEMS Technology
Fibre Channel
Server and Storage
GPON, EPON
100M / 1G /10G Ethernet
Direct pin to pin drop-in replacement for industry-standard packages
Ultra-low phase jitter: 0.5 pSec (12 kHz to 20 MHz)
LVCMOS/HCMOS Compatible Output
Industry-standard package 2.5 x 2.0, 3.2 x 2.5, and 5.0 x 3.2 mm x mm
Pb-free, RoHS and REACH compliant
Fast delivery times
Electrical Specifications:
Frequency Range
80.000 MHz to 220.000MHz
See Part Number Guide
Frequency Stability
Inclusive of Initial Tolerance, Operating Temperature Range, Load, and
Voltage
Operating Temperature
Supply Voltage (Vdd) ±10%
Current Consumption
See Part Number Guide
See Part Number Guide
34 mA typ./ 36 mA max
30 mA typ./ 33 mA max
No load condition, f = 100 MHz, Vdd = +2.5 V, +2.8 V or +3.3 V
No load condition, f = 100 MHz, Vdd = +1.8V
OE Disable Current
Standby Current
31 mA max
30 mA max
Vdd = +2.5 V, +2.8 V or +3.3 V, OE = GND
Vdd = +1.8 V, OE = GND
ꢀꢀꢀ
70 µA max
10 µA max
Vdd = +2.5 V, +2.8 V or +3.3 V, ST = GND
ꢀꢀꢀ
Vdd = +1.8 V, ST = GND
Waveform Output
Symmetry
LVCMOS/HCMOS
45%/55%
40%/60%
F = less than 165 MHz all Vdds
F = greater than 165 MHz all Vdds
Rise / Fall Time
Logic “1”
1.2 nSec typ./ 2.0 nSec max
90% of Vdd min
15 pF Load, 10% to 90% of Vdd
Logic “0”
10% of Vdd max
ꢀꢀꢀ
Input Voltage High
Input Voltage Low
Input Pull-up Impedance
70% of Vdd min
Pin 1, OE or ST
ꢀꢀꢀ
30% of Vdd max
Pin 1, OE or ST
ꢀꢀꢀ
100 kΩ typ./ 250 kΩ max
2.0 MΩ min
Pin 1, OE logic high or logic low, or ST logic high
Pin 1, ST logic low
ꢀꢀꢀ
Startup Time
7 mSec typ./ 10 mSec max
115 nSec max
Measured from the time Vdd reaches its rated minimum values
F= 80 MHz, For other frequencies, T_oe = 100 nSec = 3 cycles
OE Enable/Disable Time
Resume Time
ꢀꢀꢀ
10 mSec max
In standby mode, measured from the time ST pin crosses 50% threshold.
RMS Period Jitter
1.5 pSec typ./ 2.0 pSec max
2.0 pSec typ./ 3.0 pSec max
F = 156.25 MHz, Vdd = +2.5 V,+2.8 V or +3.3 V
F = 156.25 MHz, Vdd = +1.8 V
RMS Phase Jitter (random)
First year Aging
10-years Aging
Notes:
0.5 pSec typ./ 1.0 pSec max
±1.5 ppm
F = 156.25 MHz, Integration bandwidth = 12 kHz to 20 MHz
At +25ºC ±2ºC
At +25ºC ±2ºC
±5.0 ppm
All min and max limits are specified over temperature and rated operating voltage with 15pF output unless otherwise stated.
Typical values are at +25ºC and nominal supply voltage.
Absolute Maximum Limits
Storage Temperature
Supply Voltage (Vdd)
Electrostatic Discharge
-65ºC to +150ºC
-0.5 VDC to 4.0 VDC
2000 V max
Solder Temperature (follow standard Pb free soldering guidelines)
Junction Temperature
260ºC max
150ºC max
Rev: 01/30/16_A
Page 1 of 7
ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ●
www.ilsiamerica.com
Specifications subject to change without notice