IFX1051
Industrial High Speed CAN-FD Transceiver
1
Overview
Features
•
•
Compliant to ISO 11898-2
Wide common mode range for electromagnetic immunity
(EMI)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Very low electromagnetic emission (EME)
Excellent ESD robustness: 10 kV HBM
Guaranteed loop delay symmetry to support CAN FD data frames up to 2 MBit/s
Suitable for 12 V and 24 V applications
V
IO input for voltage adaption to the microcontroller supply
Extended supply range on VCC and VIO supply
CAN short circuit proof to ground, battery and VCC
TxD time-out function with very long TxD time-out timing: ≥ 4.5 ms
Low CAN bus leakage current in power-down state
Overtemperature protection
Protected against transients
Receive-only mode
Green Product (RoHS compliant)
Two package variants: PG-DSO-8 and tiny PG-TSON-8
Applications
•
•
•
•
•
Embedded Machine Control and Factory Automation (for example sensors and actuators)
Building Automation (for example HVAC systems, automatic doors, sun blinds)
Traffic Lights and Variable Message Signs (VMS)
Elevator and Escalator applications
Motor- and Motion-Control (for example renewable power generation: pitch control in wind power or sun-
tracking in photovoltaic)
•
any kind of CAN-application with the need of higher bandwidth
Description
The IFX1051 is a transceiver designed for HS CAN networks in industrial applications. Acting as interface
between the physical bus layer and the CAN protocol controller, the IFX1051 drives the signals to the bus and
protects the microcontroller against interferences generated within the network. Based on the high symmetry
Data Sheet
www.infineon.com/transceivers
1
Rev. 1.0
2017-03-15