IDT54/74FCT16827AT/BT/CT/ET
IDT54/74FCT162827AT/BT/CT/ET
FAST CMOS 20-BIT
BUFFERS
Integrated Device Technology, Inc.
FEATURES:
• Common features:
– 0.5 MICRON CMOS Technology
– High-speed, low-power CMOS replacement for
ABT functions
DESCRIPTION:
The FCT16827AT/BT/CT/ET and FCT162827AT/BT/CT/
ET 20-bit buffers are built using advanced dual metal CMOS
technology. These 20-bit bus drivers provide high-perfor-
mance bus interface buffering for wide data/address paths or
busses carrying parity. Two pair of NAND-ed output enable
controls offer maximum control flexibility and are organized to
operate the device as two 10-bit buffers or one 20-bit buffer.
Flow-through organization of signal pins simplifies layout. All
inputs are designed with hysteresis for improved noise mar-
gin.
The FCT16827AT/BT/CT/ET are ideally suited for driving
high capacitance loads and low impedance backplanes. The
output buffers are designed with power off disable capability
to allow "live insertion" of boards when used as backplane
drivers.
The FCT162827AT/BT/CT/ET have balanced output drive
with current limiting resistors. This offers low ground bounce,
minimalundershoot,andcontrolledoutputfalltimes–reducing
the need for external series terminating resistors. The
FCT162827AT/BT/CT/ET are plug-in replacements for the
FCT16827AT/BT/CT/ET and ABT16827 for on-board inter-
face applications.
– Typical tSK(o) (Output Skew) < 250ps
– Low input and output leakage ≤1µA (max.)
– ESD > 2000V per MIL-STD-883, Method 3015;
> 200V using machine model (C = 200pF, R = 0)
– Packages include 25 mil pitch SSOP, 19.6 mil pitch
TSSOP, 15.7 mil pitch TVSOP and 25 mil pitch Cerpack
– Extended commercial range of -40°C to +85°C
– VCC = 5V ±10%
• Features for FCT16827AT/BT/CT/ET:
– High drive outputs (-32mA IOH, 64mA IOL)
– Power off disable outputs permit “live insertion”
– Typical VOLP (Output Ground Bounce) < 1.0V at
VCC = 5V, TA = 25°C
• Features for FCT162827AT/BT/CT/ET:
– Balanced Output Drivers: ±24mA (commercial),
±16mA (military)
– Reduced system switching noise
– Typical VOLP (Output Ground Bounce) < 0.6V at
VCC = 5V,TA = 25°C
FUNCTIONAL BLOCK DIAGRAM
1OE
1
2OE
1
1OE
2
2OE
2
1A
1
1Y1
2A
1
2Y1
TO 9 OTHER CHANNELS
TO 9 OTHER CHANNELS
2773 drw 01
2773 drw 02
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
MILITARY AND COMMERCIAL TEMPERATURE RANGES
AUGUST 1996
1996 Integrated Device Technology, Inc.
5.17
DSC-2773/7
1