IDT7200L
IDT7201LA
IDT7202LA
CMOS ASYNCHRONOUS FIFO
256 x 9, 512 x 9, 1K x 9
Integrated Device Technology, Inc.
FEATURES:
DESCRIPTION:
•
•
•
•
•
First-In/First-Out dual-port memory
256 x 9 organization (IDT7200)
512 x 9 organization (IDT7201)
1K x 9 organization (IDT7202)
The IDT7200/7201/7202 are dual-port memories that load
and empty data on a first-in/first-out basis. The devices use
Full and Empty flags to prevent data overflow and underflow
andexpansionlogictoallowforunlimitedexpansioncapability
in both word size and depth.
Low power consumption
— Active: 770mW (max.)
—Power-down: 2.75mW (max.)
Ultra high speed—12ns access time
Asynchronous and simultaneous read and write
Fully expandable by both word depth and/or bit width
Pin and functionally compatible with 720X family
Status Flags: Empty, Half-Full, Full
The reads and writes are internally sequential through the
use of ring pointers, with no address information required to
loadandunloaddata. Dataistoggledinandoutofthedevices
through the use of the Write (W) and Read (R) pins.
The devices utilizes a 9-bit wide data array to allow for
control and parity bits at the user’s option. This feature is
especially useful in data communications applications where
it is necessary to use a parity bit for transmission/reception
error checking. It also features a Retransmit (RT) capability
that allows for reset of the read pointer to its initial position
when RT is pulsed low to allow for retransmission from the
beginning of data. A Half-Full Flag is available in the single
device mode and width expansion modes.
The IDT7200/7201/7202 are fabricated using IDT’s high-
speed CMOS technology. They are designed for those
applications requiring asynchronous and simultaneous read/
writes in multiprocessing and rate buffer applications. Military
grade product is manufactured in compliance with the latest
revision of MIL-STD-883, Class B.
•
•
•
•
•
•
•
•
•
Auto-retransmit capability
High-performance CEMOS technology
Military product compliant to MIL-STD-883, Class B
Standard Military Drawing #5962-87531, 5962-89666,
5962-89863 and 5962-89536 are listed on this function
Industrial temperature range (-40oC to +85oC) is
available, tested to military electrical specifications
•
FUNCTIONAL BLOCK DIAGRAM
DATA INPUTS
(D0–D8)
WRITE
W
CONTROL
WRITE
POINTER
RAM
READ
POINTER
ARRAY
256 x 9
512 x 9
1024 x 9
THREE-
STATE
BUFFERS
RS
DATA OUTPUTS
(Q0–Q8)
READ
R
RESET
LOGIC
CONTROL
FLAG
LOGIC
EF
FF
FL/RT
EXPANSION
LOGIC
XO/HF
XI
2679 drw 01
The IDT logo is a trademark of Integrated Device Technology, Inc.
MILITARY AND COMMERCIAL TEMPERATURE RANGES
DECEMBER 1996
For latest information contact IDT's web site at www.idt.com or fax-on-demand at 408-492-8391.
1996 Integrated Device Technology, Inc.
DSC-2679/7
5.03
1