ICM7218
®
Data Sheet
February 15, 2007
FN3159.2
8-Digit LED Microprocessor-Compatible
Multiplexed Display Decoder Driver
Features
• Microprocessor Compatible
The ICM7218 series of universal LED driver systems
provide, in a single package, all the circuitry necessary to
interface most common microprocessors or digital systems
to an LED display. Included on chip are an 8-byte static
display memory, two types of 7-segment decoders, multiplex
scan circuitry, and high current digit and segment drivers for
either common-cathode or common-anode displays.
• Total Circuit Integration On Chip Includes:
- Digit and Segment Drivers
- All Multiplex Scan Circuitry
- 8-Byte Static Display Memory
- 7-Segment Hexadecimal and Code B Decoders
• Output Drive Suitable for LED Displays Directly
• Common Anode and Common Cathode Versions
• Single 5V Supply Required
The lCM7218A and 1CM7218B feature two control lines
(WRITE and MODE) which write either 4 bits of control
information (DATA COMING, SHUTDOWN, DECODE, and
HEXA/CODE B) or 8 bits of display input data. Display data
is automatically sequenced into the 8-byte internal memory
on successive positive going WRITE pulses. Data may be
displayed either directly or decoded in Hexadecimal or Code
B formats.
• Data Retention to 2V Supply
• Shutdown Feature - Turns Off Display and Puts Chip Into
Low Power Dissipation Mode
• Sequential and Random Access Versions
• Decimal Point Drive On Each Digit
The ICM7218C and lCM7218D feature two control lines
(WRITE and HEXA/CODE B/SHUTDOWN), 4 separate
display data input lines, and 3 digit address lines. Display
data is written into the internal memory by setting up a digit
address and strobing the WRITE line low. Only Hexadecimal
and Code B formats are available for display outputs.
Related Literature
• Technical Brief TB363 “Guidelines for Handling and
Processing Moisture Sensitive Surface Mount Devices
(SMDs)”
ICM7218C COMMON ANODE
ICM7218D COMMON CATHODE
ICM7218A COMMON ANODE
ICM7218B COMMON CATHODE
ID0-ID3
ID7
ID4-ID7 MODE WRITE
ID0-ID7
HEXADECIMAL/
DA0-DA2
DIGIT
8
CONTROL
INPUTS
INPUT
DATA
CODE B/
DATA
INPUT
SHUTDOWN
ADDRESS
WRITE
1
1
1
1
8
4
5
3
DECODE
1
SHUTDOWN
1
CONTROL
LOGIC
SHUTDOWN
THREE LEVEL
INPUT LOGIC
HEXA/CODE B
1
8
WRITE
1
8-BYTE
STATIC
RAM
WRITE ADDRESS
COUNTER
ADDRESS
DECODER
8
8
1
8-BYTE
STATIC
RAM
1
1
8
8
READ
7
4
8
READ
ADRESS
MULTIPLEXER
ADRESS, DIGIT
MULTIPLEXER
4
HEXADECIMAL/
CODE B
DECODER
3
7
5
HEXADECIMAL/
CODE B
DECODER
MULTIPLEX
OSCILLATOR
1
7
7
MULTIPLEX
OSCILLATOR
1
DECODE/
NO-DECODE
8
1
7
INTERDIGIT
DECIMAL
POINT
BLANKING
1
INTERDIGIT
BLANKING
DECIMAL
POINT
8
8-DIGIT
DRIVERS
8-SEGMENT
DRIVERS
8-SEGMENT
DRIVERS
8-DIGIT
DRIVERS
FIGURE 1. FUNCTIONAL DIAGRAMS
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil and Design is a trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2001, 2007. All Rights Reserved
1