ICL7650S
®
Data Sheet
April 12, 2007
FN2920.10
2MHz, Super Chopper-Stabilized
Operational Amplifier
Features
• Guaranteed Max Input Offset Voltage for All Temperature
Ranges
The ICL7650S Super Chopper-Stabilized Amplifier offers
exceptionally low input offset voltage and is extremely stable
with respect to time and temperature. It is a direct
replacement for the industry-standard ICL7650 offering
improved input offset voltage, lower input offset voltage
temperature coefficient, reduced input bias current, and
wider common mode voltage range. All improvements are
highlighted in bold italics in the Electrical Characteristics
section. Critical parameters are guaranteed over the
entire commercial temperature range.
• Low Long-Term and Temperature Drifts of Input Offset
Voltage
• Guaranteed Max Input Bias Current . . . . . . . . . . . . .10pA
• Extremely Wide Common Mode
Voltage Range. . . . . . . . . . . . . . . . . . . . . . . +3.5V to -5V
• Reduced Supply Current . . . . . . . . . . . . . . . . . . . . . . 2mA
• Guaranteed Minimum Output Source/Sink Current
• Extremely High Gain . . . . . . . . . . . . . . . . . . . . . . . .150dB
• Extremely High CMRR and PSRR. . . . . . . . . . . . . .140dB
• High Slew Rate . . . . . . . . . . . . . . . . . . . . . . . . . . .2.5V/μs
• Wide Bandwidth . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2MHz
• Unity-Gain Compensated
Intersil’s unique CMOS chopper-stabilized amplifier circuitry
is user-transparent, virtually eliminating the traditional
chopper amplifier problems of intermodulation effects,
chopping spikes, and overrange lockup.
The chopper amplifier achieves its low offset by comparing
the inverting and non-inverting input voltages in a nulling
amplifier, nulled by alternate clock phases. Two external
capacitors are required to store the correcting potentials on
the two amplifier nulling inputs; these are the only external
components necessary.
• Clamp Circuit to Avoid Overload Recovery Problems and
Allow Comparator Use
• Extremely Low Chopping Spikes at Input and Output
• Improved, Direct Replacement for Industry-Standard
ICL7650 and other Second-Source Parts
The clock oscillator and all the other control circuitry is
entirely self-contained. However the 14 lead version includes
a provision for the use of an external clock, if required for a
particular application. In addition, the ICL7650S is internally
compensated for unity-gain operation.
• Pb-Free Plus Anneal Available (RoHS Compliant)
Ordering Information
PART
PART
NUMBER
MARKING
TEMP. RANGE (°C)
0 to +70
PACKAGE
8 Ld SOIC
8 Ld SOIC (Tape and Reel) M8.15
8 Ld SOIC M8.15
8 Ld SOIC (Tape and Reel) M8.15
PKG. DWG. #
ICL7650SCBA-1
7650S CBA-1
M8.15
ICL7650SCBA-1T
7650S CBA-1
7650S CBA-1Z
7650S CBA-1Z
7650S CPA-1
7650S CPA-1Z
ICL7650SCPD
7650SCPDZ
0 to +70
ICL7650SCBA-1Z (Note)
ICL7650SCBA-1ZT (Note)
ICL7650SCPA-1
0 to +70
0 to +70
0 to +70
8 Ld PDIP
E8.3
ICL7650SCPA-1Z (Note)
ICL7650SCPD
0 to +70
8 Ld PDIP* (Pb-free)
14 Ld PDIP
E8.3
0 to +70
E14.3
E14.3
ICL7650SCPDZ
0 to +70
14 Ld PDIP* (Pb-free)
*Pb-free PDIPs can be used for through hole wave solder processing only. They are not intended for use in Reflow solder processing applications.
NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin
plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are
MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2002-2005, 2007. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.