ꢀꢀ
ꢀꢀ
(888) IPD-CONVerters
ꢀ
(888) 473-2668
ꢀ
www.ipdconverters.com
IAD SERIES - DUAL OUTPUT, 12 WATT
DESCRIPTION
FEATURES
IAD dual output DC/DC converters provide up to 12
Watts of output power in an industry standard package
and footprint. With a maximum case temperature of
100°C, the IAD is well suited for the most demanding
applications. The IAD features 1500 VDC isolation,
short circuit, and overtemperature protection, as well as
six-sided shielding. The IAD is available with optional
enable and voltage trim pins. Please see the IAS series for
single output applications.
• Industry Standard
Package
• Industry Standard
Footprint
• Fixed Frequency Design • Short Circuit Protection
• 100°C Case Operation
• Optional Trim and
Enable
• Wide Range Input
• 1500V Isolation
TECHNICAL SPECIFICATIONS
Input
Voltage Range
24 VDC Nominal
48 VDC Nominal
Reflected Ripple
Input Reverse Voltage Protection
18 - 36 VDC
34 - 75 VDC
25 mA
Shunt Diode
Efficiency vs. Load (48V Input)
Output
90
85
80
75
Setpoint Accuracy
±1%
5 %
0.5% Vout
1.0% Vout
Auxillary Setpoint Accuracy
Line Regulation Vin Min. - Vin Max., Iout Rated
Load Regulation Iout Min. - Iout Max., Vin Nom.
Minimum Output Current
10 % Iout Rated
25% Iout
Dynamic Regulation, Loadstep
EFF. IAD010ZGG
70
EFF. IAD012ZHH
Pk Deviation
Settling Time
Voltage Trim Range
Short Circuit / Overcurrent Protection
Power Limit Threshold Range
4% Vout
500 µs
65
EFF. IAD012ZJJ
60
55
50
±10%
Hiccup
110 - 150%
10
20
30
40
50
60
70
80
90
100
LOAD %
General
Turn-On Time
Remote Shutdown
Switching Frequency
Isolation
300 ms
Positive Logic
400 kHz
Notes
†
MTBF predictions may vary slightly from model to model.
†† Industrial temp range available
Input - Output
1500 VDC
500 VDC
Output - Case (for 48 Vin)
Input - Case (for 24 Vin)
Temperature Coefficient
Case Temperature
1050 VDC
±0.03%/°C
Specifications typically at 25°C, normal line, and full load, unless otherwise stated.
Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with
commercial wave-soldering equipment.
Operating Range
-40 To +85°C
-40 To +110°C
95%
5 g, 10 - 55 Hz
1.8 X 106 hrs
UL, CUL, VDE
1.2 oz
Storage Range
Safety: Agency approvals may vary from model to model. Please consult factory
for specific model information.
Humidity Max., Non-Condensing
Vibration, 3 Axes, 5 Min Each
MTBF† (Bellcore TR-NWT-000332)
Safety
Units are water-washable and fully compatible with commercial spray or immersion
post wave-solder washing equipment.
Weight (Approx.)
C-70