HV9110
High-Voltage Current-Mode PWM Controller
General Description
Features
► 10V to 120V Input Voltage Range
► Current-mode control
► High efficiency
► Up to 1.0MHz internal oscillator
► Internal start-up circuit
► Low internal noise
The Supertex HV9110 is a BiCMOS/DMOS single-output,
pulse width modulator IC intended for use in high-speed,
high-efficiency switch mode power supplies. It provides all the
functions necessary to implement a single-switch current mode
PWM, in any topology, with a minimum of external parts.
Because the HV9110 utilizes Supertex’s proprietary BiCMOS/
DMOS technology, it requires less than one tenth of the operating
power of conventional bipolar PWM ICs, and can operate at
more than twice their switching frequency. The dynamic range
for regulation is also increased, to approximately 8 times that
of similar bipolar parts. It starts directly from any DC input
voltage between 10 and 120VDC, requiring no external power
resistor. The output stage is push-pull CMOS and thus requires
no clamping diodes for protection, even when significant lead
length exists between the output and the external MOSFET. The
clock frequency is set with a single external resistor.
Applications
► DC/DC converters
► Distributed power systems
► ISDN equipment
► PBX systems
► Modems
Accessory functions are included to permit fast remote shutdown
(latching or nonlatching) and under voltage shutdown.
Ordering Information
For similar ICs intended to operate directly from up to 450VDC
input, please consult the data sheets for the HV9120 and
HV9123.
Package Option
Device
14-Lead Narrow Body SOIC (NG)
HV9110
HV9110NG-G
For detailed circuit and application information, please refer to
application notes AN-H13 and AN-H21 to AN-H24.
-G indicates package is RoHS compliant (‘Green’)
Pin Configuration
OSC IN
DISCHARGE
VREF
SHUTDOWN
RESET
COMP
FB
Absolute Maximum Ratings
OSC OUT
VDD
Parameter
Value
120V
15.5V
-VIN
OUTPUT
SENSE
Input voltage, VIN
Logic voltage, VDD
Logic linear input,
FB and sense input voltage
Storage temperature
Power dissipation
+VIN
BIAS
14-Lead Narrow Body SOIC (NG)
-0.3V to VDD +0.3V
Product Marking
-65°C to +150°C
750mW
Top Marking
Y = Last Digit of Year Sealed
HV9110NG
WW = Week Sealed
L = Lot Number
YWW LLLLLLLL
Bottom Marking
CCCCCCCCC AAA
Stresses beyond those listed under “Absolute Maximum Ratings” may
cause permanent damage to the device. These are stress ratings only,
and functional operation of the device at these or any other conditions
beyond those indicated in the operational sections of the specifications
is not implied. Exposure to absolute maximum rating conditions for
extended periods may affect device reliability.
C = Country of Origin*
A = Assembler ID*
= “Green” Packaging
*May be part of top marking
14-Lead Narrow Body SOIC (NG)