HV5122
HV5222
32-Channel Serial To Parallel Converter
With Open Drain Outputs
Ordering Information
Package Options
44 J-Lead Quad
Device
44 J-Lead Quad
44 Lead Quad
Die
Ceramic Chip Carrier
Plastic Chip Carrier
Plastic Gullwing
HV5122
HV5222
HV5122DJ
HV5222DJ
HV5122PJ
HV5122PG
HV5222PG
HV5122X
HV5222X
HV5222PJ
Features
General Description
■
■
■
■
■
■
■
■
■
Processed with HVCMOS® technology
The HV51 and HV52 are low voltage serial to high voltage parallel
converters with open drain outputs. These devices have been
designed for use as drivers for AC electroluminescent displays.
They can also be used in any application requiring multiple output
high voltage current sinking capabilities such as driving inkjet and
electrostatic print heads, plasma panels, vacuum fluorescent, or
large matrix LCD displays.
Output voltages to 225V using a ramped supply voltage
Sink current minimum 100mA
Shift register speed 8MHz
Strobe and enable inputs
CMOS compatible inputs
These devices consist of a 32-bit shift register and control logic to
perform the Output Enable and All-ON functions. Data is shifted
through the shift register on the high to low transition of the clock.
The HV51 shifts in the counterclockwise direction when viewed
from the top of the package and the HV52 shifts in the clockwise
direction. A data output buffer is provided for cascading devices.
This output reflects the current status of the last bit of the shift
register. Operation of the shift register is not affected by the OE
(Output Enable) or the STR (Strobe) inputs.
Forward and reverse shifting options
44-lead ceramic surface mount package
Hi-Rel processing available
Absolute Maximum Ratings1
The HV51 and HV52 have been designed to be used in systems
which either switch off the high voltage supply before changing
the state of the high voltage outputs or which limit the current
through each output.
Supply voltage, VDD
Output voltage, VPP
Logic input levels
Ground current2
-0.5V to +15V
-0.5V to +250V
-0.5V to VDD + 0.5V
1.5A
Continuous total power dissipation3 Plastic
Ceramic
1200mW
1500mW
Operating temperature range
Plastic -40°C to +85°C
Ceramic
-55 to +125°C
-65°C to +150°C
260°C
Storage temperature range
Lead temperature 1.6mm (1/16 inch)
from case for 10 seconds
Notes:
1. All voltages are referenced to GND.
2. Duty cycle is limited by the total power dissipated in the package.
3. For operation above 25°C ambient derate linearly to maximum operating
temperature at 20mW/°C for plasitc and at 15mW/°C for ceramic.
12/13/01
Supertex Inc. does not recommend the use of its products in life support applications and will not knowingly sell its products for use in such applications unless it receives an adequate "products liability
indemnification insurance agreement." Supertex does not assume responsibility for use of devices described and limits its liability to the replacement of devices determined to be defective due to
workmanship. No responsibility is assumed for possible omissions or inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications, refer to the
Supertex website: http://www.supertex.com. For complete liability information on all Supertex products, refer to the most current databook or to the Legal/Disclaimer page on the Supertex website.
1