HT814D0
8.4-Second LOG-PCM Speech
Features
·
·
·
·
·
·
Operating voltage: 2.4V~5.0V
·
·
FLAG2 options
-
Directly drives an external transistor
Low standby current (1mA typ. for VDD=3V)
Minimal external components
508 words table ROM for key functions
Programmable silence length and end-pulse
width (minimal end-pulse width is 330ms at a
6kHz sampling rate)
3Hz flash
6Hz flash
-
-
Busy output
Key options
-
Stop key: KEY12
Random (only for KEY1)
-
-
Sequential (only for KEY1)
Repeat (for all KEYs)
Key debounce time (for all KEYs): 700ms,
-
·
8.4-second voice capacity (based on a 6kHz
sampling rate)
12 keys
-
22ms, 45ms, 180ms (based on a sampling
rate of approximate 6kHz)
One shot (for all KEYs)
·
·
·
Controllable volume
FLAG1 options
-
-
-
Level-trigger
Pull-high resistance (for all KEYs)
End-pulse output
3HzB flash
-
-
-
·
·
Section options
-
6HzB flash
Voice output indication
Busy output
-
Retriggerable
Non-retriggerable
Dice form or 20/24-pin DIP/SOP package
-
-
Applications
·
·
·
Leisure products
Alarm clocks
Public address system
·
·
Alert and warning system
Sound effect generators
General Description
The HT814D0 is a single chip LOG-PCM voice
synthesizer LSI with 8.4-second voice capacity
at a 6kHz sampling rate. The chip when trig-
gered drives a speaker through an external
transistor with a current switch D/A converter
output. Negligible current will be consumed in
the standby state.
The customer¢s voice sources are recorded sec-
tion by section into an internal mask ROM. The
sectional playback arrangement instructions of
each key are stored in the table ROM. The key
features are also programmable. With such a
flexible structure, the HT814D0 is excellent for
versatile voice applications.
The HT814D0 provides 12 key inputs and 2 pro-
grammable FLAG outputs. With a 2.4V~5.0V
power supply, a complete synthesized voice
playback system can be easily built with very
few external components.
1
March 15, 2000
Powered by ICminer.com Electronic-Library Service CopyRight 2003