HT46R72D-1
Dual Slope A/D Type MCU with LCD
Technical Document
·
Tools Information
·
FAQs
·
Application Note
-
HA0003E Communicating between the HT48 & HT46 Series MCUs and the HT93LC46 EEPROM
HA0004E HT48 & HT46 MCU UART Software Implementation Method
HA0005E Controlling the I2C bus with the HT48 & HT46 MCU Series
HA0007E Using the MCU Look Up Table Instructions
-
-
-
-
-
HA0049E Read and Write Control of the HT1380
HA0075E MCU Reset and Oscillator Circuits Application Note
Features
·
·
·
Operating voltage:
On-chip RC or crystal oscillator
f
f
SYS=4MHz: 2.2V~5.5V
SYS=8MHz: 3.3V~5.5V
HALT function and wake-up feature reduce power
consumption
·
·
·
12 bidirectional I/O lines and two ADC input
·
·
·
·
·
·
Voltage regulator (3.3V) and charge pump
Embeded voltage reference generator (1.5V)
4-level subroutine nesting
One external interrupt input shard with an I/O lines
One 8-bit and one 16-bit programmable timer/event
counter with overflow interrupt a 8-stage pre-scalar
Bit manipulation instruction
·
·
·
·
LCD driver with 16´4, 17´3 or 17´2 segments
2K´15 program memory with partial lock function
96´8 data memory RAM
14-bit table read instruction
Up to 0.5ms instruction cycle with 8MHz system clock
at VDD=5V
·
·
·
·
Single differential input channel dual slope Analog to
Digital Converter with Operational Amplifier.
63 powerful instructions
All instructions in 1 or 2 machine cycles
Low voltage reset/detector function
52-pin QFP package
·
·
·
Watchdog Timer with regulator power
Buzzer output
Internal 12kHz RC oscillator
General Description
The HT46R72D-1 is an 8-bit high performance, RISC
architecture microcontroller device specifically de-
signed for A/D with LCD applications that interface di-
rectly to analog signals, such as those from sensors.
The advantages of low power consumption, I/O flexibil-
ity, timer functions, oscillator options, Dual slope A/D
converter, LCD display, HALT and wake-up functions,
watchdog timer, as well as low cost, enhance the versa-
tility of these devices to suit for a wide range of AD with
LCD application possibilities such as sensor signal pro-
cessing, scales, consumer products, subsystem con-
trollers, etc.
Rev. 1.20
1
August 22, 2007