HT46R92
A/D Type 8-Bit MCU with 16´ 16 High Current LED Driver
Technical Document
·
·
·
Tools Information
FAQs
Application Note
-
HA0003E Communicating between the HT48 & HT46 Series MCUs and the HT93LC46 EEPROM
-
HA0049E Read and Write Control of the HT1380
-
HA0075E MCU Reset and Oscillator Circuits Application Note
Features
·
·
·
·
·
Operating voltage:
Watchdog Timer
f
f
f
SYS=32768Hz: 2.2V~5.5V
SYS=4MHz: 2.2V~5.5V
SYS=8MHz: 3.3V~5.5V
2048´14 program memory
88´8 data memory
Power down and wake-up functions to reduce
power consumption
·
·
·
·
·
8 bidirectional I/O lines
Max. 16´16 LED driver output
8 LED shared I/O lines
24 LED shared output
·
Up to 0.5ms instruction cycle with 8MHz system
clock at VDD=5V
·
·
·
·
·
·
·
·
6-level subroutine nesting
External dual edge triggered interrupt input shared
with I/O line
6 channel 12-bit resolution A/D converter
2 channel 8-bit PWM output shared with I/O lines
1/2 bias 4 common LCD
·
Single 8-bit programmable Timer/Event Counters
with overflow interrupt
Bit manipulation instruction
·
·
RC/XTAL and 32768Hz crystal oscillators
Table read instructions
Dual clock system offers three operating modes
-
63 powerful instructions
Normal mode: Both RC/XTAL and 32768Hz clock
All instructions executed in one or two machine
cycles
active
-
Slow mode: 32768Hz clock only
-
Power-down mode can have periodical wake-up
·
·
Low voltage reset function
44/52-pin QFP package
using the watchdog timer overflow
General Description
The HT46R92 is an 8-bit high performance RISC archi-
tecture microcontroller, the device is designed espe-
cially for applications that interface directly to analog
signals, such as those from sensors. The devices in-
clude an integrated multi-channel Analog to Digital Con-
verter in addition to two Pulse Width Modulation
outputs. An internal high current LED driver circuit also
provides for easy interfacing to applications which con-
tain LED displays.
The benefits of integrated A/D and PWM functions, in
addition to low power consumption, high performance,
I/O flexibility and low-cost, provides the device with the
versatility to suit a wide range of application possibilities
such as sensor signal processing, motor driving, indus-
trial control, consumer products, subsystem controllers,
etc.
As is the case with all Holtek microcontroller devices,
the HT46R92 is fully supported by a full suite of
professional hardware and software tools, containing
comprehensive features to ensure user applications are
designed and debugged in as short a time as possible.
The usual Holtek MCU features such as power down
and wake-up functions, oscillator options, etc. combine
to ensure user applications require a minimum of exter-
nal components.
Rev. 1.10
1
November 5, 2008