H Series Crystal
¾ 6.0mm x 3.5 mm x1.2mm Ceramic Package
¾ Tight Tolerance and Stability
¾ Wide Frequency Range
¾ Tape and Reel Packaging
ESR CHART:
ELECTRICAL SPECIFICATIONS:
Frequency Range
8.000MHZ to 100.000MHZ
(See Part Number Guide for Options)
(See Part Number Guide for Options)
-40°C to +85°C
Frequency Range
ESR (Ohms)
100 max
80 max
60 max
40 max
Mode / Cut
Fund / AT
Fund / AT
Fund / AT
Fund / AT
3rd OT/ AT
Frequency Tolerance / Stability
Operating Temperature Range
Storage Temperature
Aging
8.000MHZ to 10.999MHZ
11.000MHZ to 11.999MHZ
12.000MHZ to 15.999MHZ
16.000MHZ to 39.999MHZ
40.000MHZ to100.000MHZ
±5ppm per year max
7pF max
20pF Standard
Shunt Capacitance
70 max
Load Capacitance
(See Part Number Guide for Options)
Equivalent Series Resistance
Mode of Operation
Drive Level
See ESR Chart
Fundamental / 3rd OT
MARKING:
100µW max
Line 1: MXX.XXX
XX.XXX = Frequency in MHz
Insulation Resistance
Shock
Solderability
Solvent Resistance
Vibration
Gross Leak Test
Fine Leak Test
500 M ohms min at 100VDC ±15VDC
MIL-STD-883, Meth 2002, Cond B
MIL-STD-883, Meth 2003
Line 2: SYMCCL
S = Internal Code
YM = Date Code (Year/Month)
CC = Crystal Parameters Code
L = Denotes RoHS Compliant
MIL-STD-202, Meth 215
MIL-STD-883, Meth 2007, Cond A
MIL-STD-883, Meth 1014, Cond C
MIL-STD-883, Meth 1014, Cond A
MECHANICALS DETAIL:
6.20 [.244]
MAX
1.20 [.047]
MAX
3.00 [.118]
2.40 [.094]
PIN CONNECTIONS
PIN 1 CRYSTAL
PIN 2 CASE GROUND
PIN 3 CRYSTAL
1.10 [.043]
3
2
4
1
3.70 [.146]
MAX
MARKING
PIN 4 CASE GROUND
1.50 [.059]
1.40 [.055]
2.00 [.079]
Dimension in Brackets are in Inches
Recommended
Land Pattern
PART NUMBER GUIDE:
Frequency
H
6mm X 3.5mm x 1.2mm
4 Pads
Mode of Operation
1 = Fundamental
3 = 3rd Overtone
Temperature
Tolerance/Stability*
A = ±50 ppm / ±100 ppm
B = ±30 ppm / ±50 ppm
C = ±15 ppm / ±30 ppm
D = ±10 ppm / ±15 ppm
E = ±50 ppm / ±50 ppm
N = ±10 ppm / ±10 ppm
Load Capacitance
S = Series
20 = 20pF (Standard)
Operating Temperature
A = 0°C to +70°C
B = -20°C to +70°C
C = -40°C to +85°C **
Value Added Options
Blank = No Added Options
T = Tape and Reel
XX = XXpF (8pF to 50pF)
* Please consult with MMD sales department for any other parameters or options.
** Not all Frequency Tolerance/Stability options available at this temperature range.
MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
Sales@mmdcomp.com
Specifications subject to change without notice
Revision H070808G