High Speed Converter Evaluation Platform
HSC-ADC-EVALC
PRODUCT HIGHLIGHTS
FEATURES
Xilinx Virtex-4 FPGA-based buffer memory board
Used for capturing digital data from high speed ADC
evaluation boards to simplify evaluation
64 kB FIFO depth
1. Easy to Set Up. Connect the included power supply along
with the CLK and AIN signal sources to the two evaluation
boards. Then connect to the PC via the USB port and
evaluate the performance instantly.
Parallel input at 644 MSPS SDR and 800 MSPS DDR
Supports 1.8 V, 2.5 V, and 3.3 V CMOS and LVDS interfaces
Supports multiple ADC channels up to 18 bits
Measures performance with VisualAnalog
Real-time FFT and time domain analysis
Analyzes SNR, SINAD, SFDR, and harmonics
Simple USB port interface (2.0)
Supports ADCs with serial port interfaces (SPI)
FPGA reconfigurable via JTAG, on-board EPROM, or USB
On-board regulator circuit speeds setup
5 V, 3 A switching power supply included
Compatible with Windows 98 (2nd edition), Windows 2000,
Windows ME, and Windows XP
2. USB Port Connection to PC. PC interface is via a USB 2.0
connection (1.1 compatible) to the PC. A USB cable is
provided in the kit.
3. 64 kB FIFO. The on-board FPGA contains an integrated
FIFO to store data captured from the ADC for subsequent
processing.
4. Up to 644 MSPS SDR/800 MSPS DDR Encode Rates on
Each Channel. Multichannel ADCs with encode rates up
to 644 MSPS SDR and 800 MSPS DDR can be used with
the ADC capture board.
5. Supports ADCs with Serial Port Interface or SPI. Some
ADCs include a feature set that can be changed via the
SPI. The ADC capture board supports these SPI-driven
features through the existing USB connection to the
computer without additional cabling needed.
EQUIPMENT NEEDED
Analog signal source and antialiasing filter
6. VisualAnalog™. VisualAnalog supports the HSC-ADC-
EVALC hardware platform as well as enabling virtual ADC
evaluation using ADIsimADC™, Analog Devices proprietary
behavioral modeling technology. This allows rapid compari-
son between multiple ADCs, with or without hardware
evaluation boards. For more information, see AN-737 at
www.analog.com/VisualAnalog.
Low jitter clock source
High speed ADC evaluation board and ADC data sheet
PC running Windows 98 (2nd edition), Windows 2000,
Windows ME, or Windows XP
Latest version of VisualAnalog
USB 2.0 port recommended (USB 1.1 compatible)
FUNCTIONAL BLOCK DIAGRAM
ON-BOARD
VOLTAGE
REGULATORS
HSC-ADC-EVALC
POWER
CONNECTOR
USB
SINGLE OR MULTICHANNEL
HIGH SPEED ADC
FPGA
CONFIGURATION
MODE
LED2
LED1
UPLOAD CAPTURE
EVALUATION BOARD
PORTB
PORTD
DATA(16)
FIFO
CONTROL(9)
DATA BUS 2(18)
CLKA(2)
n
FILTERED
ANALOG
INPUT
J6
J3*
USB
CONTROLLER
FPGA
ADC
USB
CONNECTOR
DATA BUS 1(18)
CLKB(2)
PORTC
PORTE
PORTA
n
J2*
STANDARD
USB 2.0
EXT SYNC1
EXT SYNC2
FPGA
DONE
CLOCK
CIRCUIT
USB
CONFIG
PROM
ONBOARD
VOLTAGE
REGULATORS
J4
FPGA
CONFIG
PROM
POWER
CONNECTOR
FPGA GPIO(8)
SPI(7)
J1*
RECONFIG
SPI
USB DIRECT(5)
J10
*DATA CONVERTER I/O CONNECTORS
JTAG
CONNECTOR
CLOCK INPUT
Figure 1.
Rev. 0
Evaluation boards are only intended for device evaluation and not for production purposes.
Evaluation boards as supplied “as is” and without warranties of any kind, express, implied, or
statutory including, but not limited to, any implied warranty of merchantability or fitness for a
particular purpose. No license is granted by implication or otherwise under any patents or other
intellectual property by application or use of evaluation boards. Information furnished by Analog
Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog
Devices for its use, nor for any infringements of patents or other rights of third parties that may result
from its use. Analog Devices reserves the right to change devices or specifications at any time
without notice. Trademarks and registered trademarks are the property of their respective owners.
Evaluation boards are not authorized to be used in life support devices or systems.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2007 Analog Devices, Inc. All rights reserved.