HS-302RH/883S, HS-303RH/883S,
HS-306RH/883S, HS-307RH/883S,
HS-384RH/883S, HS-390RH/883S
Radiation Hardened
CMOS Analog Switches
September 1995
Features
Description
• This Circuit is Processed in Accordance to Mil-Std- The HS-3XXRH/883S family of analog switches are
883 and is Fully Conformant Under the Provisions of monolithic devices fabricated using Radiation Hardened
Paragraph 1.2.1.
CMOS technology and the Intersil dielectric isolation pro-
cess for latch-up free operation. Improved total dose hard-
ness is obtained by layout (thin oxide tabs extending to a
channel stop) and processing (hardened gate oxide). These
switches offer low-resistance switching performance for ana-
log voltages up to the supply rails. “ON” resistance is low
and stays reasonably constant over the full range of operat-
ing voltage and current. “ON” resistance also stays reason-
ably constant when exposed to radiation, being typically 30Ω
pre-rad and 35Ω post 100K RAD-Si. All devices provide
break-before-make switching.
• Radiation Hardened
- Functional Total Dose Exceeds 1 x 105 RAD Si
• Pin for Pin Compatible with Intersil HI-3XX Series
Analog Switches
• Analog Signal Range 15V
• Low Leakage
• Low RON
• No Latch Up
The 6 devices in this switch series are differentiated by type
of switch action, pinout and digital logic levels. The HS-302/
303/384/390RH/883S switches have 5V digital inputs while
the HS-306/307RH/883S switches have 15V digital inputs.
All devices are available in Ceramic Flatpack and SBDIP
packages. The HS-3XXRH/883S switches can directly
replace the HI-3XX series devices.
• Versions for 5V and 15V Digital Systems
• Low Operating Power
• Military Temperature Range -55oC to +125oC
Applications
• Sample and Hold i.e. Low Leakage Switching
• Op Amp Gain Switching i.e. Low ON Resistance
• Switched Capacitor Filters
• Low Level Switching Circuits
• Satellites
Functional Diagram
N
P
IN
D
• Nuclear Reactor Controls
• Military Environments
Ordering Information
PART NUMBER
HS1-302RH/883S
TEMPERATURE RANGE
SCREENING LEVEL
Intersil /883 Class S Equivalent
Intersil /883 Class S Equivalent
Sample
PACKAGE
o
o
-55 C to +125 C
14 Lead SBDIP
o
o
HS9-302RH/883S
-55 C to +125 C
14 Lead Ceramic Flatpack
14 Lead SBDIP
o
HS1-302RH/Sample
HS9-302RH/Sample
HS1-303RH/883S
+25 C
o
+25 C
Sample
14 Lead Ceramic Flatpack
14 Lead SBDIP
o
o
-55 C to +125 C
Intersil /883 Class S Equivalent
Intersil /883 Class S Equivalent
Sample
o
o
HS9-303RH/883S
-55 C to +125 C
14 Lead Ceramic Flatpack
14 Lead SBDIP
o
HS1-303RH/Sample
HS9-303RH/Sample
HS1-306RH/883S ( Note 1)
HS9-306RH/883S ( Note 1)
+25 C
o
+25 C
Sample
14 Lead Ceramic Flatpack
14 Lead SBDIP
o
o
-55 C to +125 C
Intersil /883 Class S Equivalent
Intersil /883 Class S Equivalent
o
o
-55 C to +125 C
14 Lead Ceramic Flatpack
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
Spec Number 518526
File Number 3067.1
http://www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999
1