F-208
HIGH SPEED CABLE
A
S S E M B L I E S
EQDP–028–06.00–STL–TTL–3–S
HQDP–020–06.00–SEU–TTL–2–F
HQDP, EQDP
0,50mm & 0,80mm TWINAX SERIES
EQDP Mates with:
QTE-DP, QSE-DP
SPECIFICATIONS
For complete specifications
see www.samtec.com?EQDP
or www.samtec.com?HQDP
HQDP Mates with:
QTH-DP, QSH-DP
Differential Pair
routing
Cable:
30 AWG
®
EyeSpeed™ MS
twinax micro ribbon
Signal Routing:
100Ω Differential
Cable Bending Radius:
(11,11mm) 7/16" min
Plating:
Au over 50µ" (1,27µm) Ni
Current Rating:
1 A max
30 AWG
EyeSpeed™ MS
twinax
Surface
Mount or
Edge Mount
ribbon cable
Propagation Delay:
4.67 nsec/meter
Operating Temp Range:
-20°C to +90°C
Skew (pair-to-pair):
<10 ps/ft
Rated @ -3dB Insertion Loss
Cable
Length
Socket or
Terminal
EQDP
HQDP
6" (152,4mm)
12" (304,8mm)
19.68" (0,5m)
39.37" (1m)
4.48 GHz / 8.96 Gbps 5.94 GHz / 11.88 Gbps
4.11 GHz / 8.22 Gbps 5.81 GHz / 11.62 Gbps
3.58 GHz / 7.16 Gbps 3.00 GHz / 6.00 Gbps
1.32 GHz / 2.64 Gbps 1.76 GHz / 3.52 Gbps
Skew (within a pair):
<5 ps/ft
Optional Captive
Screw or Screw Mount Option
EMI Performance:
FCC Class A
RoHS Compliant:
Yes
END
NO. 1
NO. OF
PAIRS
WIRE
LENGTH
END
NO. 2
WIRING
OPTION
SCREW
OPTION
TYPE
APPLICATIONS
(12,70)
.500
Leave
blank for
no Screw
Option
Specify
–1
= Pin 1 to
Pin 1
–020, –040,
END
–060, –080
(20 pairs per bank)
HQDP Series
HQDP
= (0,50mm)
.0197" pitch
–“XX.XX”
= Wire Length
in Inches
(95,3mm) 03.75"
minimum
ASSEMBLIES
from chart
(16,56)
.652
(9,28)
.365
–2
= Pin 1 to
Pin 2
–F
= End
No. 1
–014, –028,
–042, –056
(14 pairs per bank)
EQDP Series
END SURFACE MOUNT
EQDP
= (0,80mm)
.0315" pitch
Processing conditions will
affect mated height.
Terminal, Top,
TTR
Notch Right
–3
–S
= End
No. 2
= Pin 1 to
Second
Last Pin
Terminal, Top,
Notch Left
TTL
L
END TO END
Surface Mount to
Surface Mount
Terminal, Bottom,
Notch Right
OAL = Wire Length + L
TBR
(24,13)
.950
–B
= Both
Ends
Wire Length (1,27) .050
–4
Terminal, Bottom,
TBL
Surface Mount to
Edge Mount (Terminal)
Surface Mount to
Edge Mount (Socket)
(21,21)
.835
Notch Left
= Pin 1 to
Last Pin
Socket, Top
Notch Right,
STR
(20,47)
.806
Socket, Top,
Edge Mount (Terminal) to
Edge Mount (Terminal)
Edge Mount (Terminal) to
Edge Mount (Socket)
Edge Mount (Socket) to
Edge Mount (Socket)
(18,29)
.720
WIRING REQUIREMENTS
STL
Notch Left
WIRING
OPTION
END OPTIONS
(17,55)
.691
Socket, Bottom,
Notch Right
SBR
TTR, TBL, STL,
SBR, TEU, SED to TTR,
TBL, STL, SBR, TED, SEU
or
(16,81)
.662
Socket, Bottom,
Notch Left
SBL
1 or 2
TTL, TBR, STR,
END
TEU
EDGE MOUNT
Note: Cable lengths longer
than 40.00" (1 meter) are not
supported with S.I. test data.
SBL, TED, SEU to TTL,
TBR, STR, SBL, TEU, SED
Terminal, Edge,
Notch Up
END NO. 1
(–TEU SHOWN)
TTR, TBL, STL,
SBR, TEU, SED to TTL,
TBR, STR, SBL, TEU, SED
or
Terminal, Edge,
Notch Down
TED
SEU
SED
Note: Verify part number with
Samtec’s Interactive Cable
Builder at www.samtec.com/
cable_builder/pitch.asp
END NO. 2
(–TTR SHOWN)
3 or 4
Socket, Edge,
Notch Up
TTL, TBR, STR,
SBL, TED, SEU to TTR,
TBL, STL, SBR, TED, SEU
Socket, Edge,
Notch Down
Note: This Series is
non-standard, non-returnable.
WWW.SAMTEC.COM