REVISION Z
THIS PRODUCT MANUFACTURED
WITH LEAD-FREE PROCESSING
DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
HPSTP-XX-XXXX-XX-XX
Pb
SECOND END
DO NOT
SCALE FROM
THIS PRINT
No OF POSITIONS
-S: STANDARD PLUG
AVAILABLE FIRST END:
(19 AND 29 POSITION)
-S: STANDARD PLUG
-M: MINI PLUG
-19: (5 SIG PAIRS/4 POWER LINES)
USES HDMP-19 (SEE FIG. 1)
-29: (8 SIG PAIRS/6 POWER LINES)
USES HDMP-29 (SEE FIG. 2)
FIRST END
-S: STANDARD PLUG
AVAILABLE SECOND END:
(19 AND 29 POSITION)
-STANDARD PLUG
-M: MINI PLUG
AVAILABLE FIRST END:
(19 POSITION ONLY)
-M: MINI PLUG
LENGTH *
(IN MILLIMETERS)
-M: MINI PLUG
AVAILABLE SECOND END:
(19 POSITION ONLY)
-M: MINI PLUG
-0500 - 9999
-SL: LOCKING STANDARD PLUG
AVAILABLE FIRST END:
(19 POSITION ONLY)
-SL: LOCKING SECOND PLUG
-ML: LATCHING MINI PLUG
AVAILABLE FIRST END
(19 POSITION ONLY)
-ML: LATCHING MINI PLUG
*CONTACT SAMTEC FOR CUSTOM
LENGTHS.
-1000, 2000, 3000, AND 5000 IN STOCK
LENGTHS LONGER THAN 5000 NOT
SUPPORTED BY TEST DATA
-S: STANDARD PLUG
-SL: LOCKING STANDARD PLUG
AVAILABLE SECOND END:
(19 POSITION ONLY)
-SL: LOCKING SECOND PLUG
-ML: LATCHING MINI PLUG
AVAILABLE SECOND END
(19 POSITION ONLY)
-ML: LATCHING MINI PLUG
"D" REF
(SEE TABLE 1)
"E" REF (TYP)
HDRL-11
(SEE NOTE 11)
1
2
18
19
2
1
LABEL-ET
FIG. 1
(SEE NOTE 3)
C2
"A"
(SEE TABLE 1)
HPSTP-19-XXXX-S-S SHOWN
LENGTH (500MM OR LESS = +10% / -5%, GREATER THAN 500MM = +/-3%)
C1
(SEE CALLOUT)
4.45 .175 REF.
"C" REF.
(SEE TABLE 1)
"F" REF (TYP)
Z
NOTES:
STPC-XX-02-XXXX
C
1.
REPRESENTS A CRITICAL DIMENSION.
C4 2. ALL ASSEMBLIES TO BE 100% ELECTRICALLY TESTED.
3. ALL ASSEMBLIES TO BE 100% HI-POT TESTED AT 300V.
C3
AFTER FINAL ELECTRICAL TEST, LABEL EACH ASSEMBLY WITH 1 LABEL-ET.
4. WRAP ENDS FOR PROTECTION AND PACKAGE IN CLEAR POLY BAGS.
5. SEE TABLE 2, 3, 4, & 5 FOR SIGNAL/GROUND/POWER CONFIGURATION.
6. CONNECTOR SHEILD TIED TO BRAIDED CABLE SHIELD.
C5
7. GOLD SHALL BE .000030" MIN GOLD PER MIL-G-45204B, CLASS 1, TO BE MEASURED IN CONTACT AREA.
8. NICKEL SHALL BE .000080" MIN PER QQ-N-290, CLASS 1, MEASURED ON SHELL.
9. NOTE DELETED.
10. NOTE DELETED.
PROPRIETARY NOTE
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN MILLIMETERS. THIS DOCUMENT CONTAINS INFORMATION
TOLERANCES ARE:
DECIMALS
11. HDRL-11 IS TO BE CENTERED ON CABLE AS SHOWN.
HDRL-11 IS TO CONTAIN: PART NUMBER, SHOP ORDER,
& DATE CODE.
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
ANGLES
2
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
.X: .3 [.01]
.XX: .13 [.005]
.XXX: .051 [.002]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
SHEET SCALE: 1:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
HDMI SHIELDED TWISTED PAIR CABLE ASSY
OVERMOLD: PVC (UL94 V-0)
PREMOLD: PE (UL94 V-0)
CONNECTOR: LCP (UL94 V-0)
CABLE: (VW-1)
DWG. NO.
HPSTP-XX-XXXX-XX-XX
John Riley 2/23/2006
SHEET 1 OF 7
BY:
F:\DWG\MISC\MKTG\HPSTP-XX-XXXX-XX-XX-MKT.SLDDRW