HPH Series
www.murata-ps.com
Isolated, Low VOUT to 70A, Half-Brick DC/DC Converters
Murata Power Solutions’ fully isolated HPH series of DC/DC converters affords users a
practical solution for their low-voltage/high-current applications. With an input voltage range of
36 to 75 Volts, the HPH Series delivers up to 70 Amps of output current from a fully regulated
3.3V output.
PRODUCT OVERVIEW
Typical unit
Using both surface-mount technology
and planar magnetics, these converters
are manufactured on a 2.3" x 2.4", lead-
These DC/DC’s provide output trim,
sense pins and primary side on/off con-
trol (available with positive or negative
FEATURES
ꢀ
RoHS Compliant
free, open-frame package with an industry- logic). Standard features also include input
standard pinout.
undervoltage shutdown circuitry, output
overvoltage protection, output short-circuit
and current limiting protection and ther-
mal shutdown. All devices meet IEC/UL/
ꢀ
3.3V to 12V outputs @ up to 70 Amps
HPH converters utilize a full-bridge,
fixed-frequency topology along with syn-
chronous output rectification to achieve a
ꢀ
Input range: 36V-75V
ꢀ
Open Frame: 2.3" x 2.4" x 0.40"
high efficiency. This efficiency, coupled with EN60950-1 safety standards and carry the
ꢀ
Industry-standard package/pinout
the open-frame package that allows unre-
stricted air flow, reduces internal component
temperatures thereby allowing operation at
elevated ambient temperatures.
CE mark (meet LVD requirements).
ꢀ
Remote sense, Trim, On/Off control
ꢀ
High efficiency: up to 91%
ꢀ
Fully isolated, 2250Vdc (BASIC)
ꢀ
Input undervoltage shutdown
ꢀ
Output overvoltage protection
SIMPLIFIED SCHEMATIC
ꢀ
Short circuit protection, thermal shutdown
+SENSE
(6)
+Vin
(4)
ꢀ
Designed to meet UL/EN/IEC 60950-1, CAN/
+Vout
(5)
CSA-C22.2 No. 60950-1 safety approvals
ꢀ
CE mark
ꢀ
Optional baseplate offers increased thermal
performance
SWITCH
CONTROL
-Vout
(9)
+Vin
(1)
-SENSE
(8)
PULSE
TRANSFORMER
Input undervoltage, input
overvoltage, and output
overvoltage comparators
OPTO
PWM
REFERENCE &
ERROR AMP
Vout
TRIM
(7)
ISOLATION
CONTROLLER
REMOTE
ON /OFF
CONTROL*
(3)
* Can be ordered with positive (standard) or negative (optional) polarity.
Typical topology is shown. Some models may vary slightly.
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com
Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000
MDC_HPH_A12 Page 1 of 12