DEVELOPER KIT
(Info: click here)
HN 10 Series
HN-510
Built on the heritage of the original FHSS family of modems and combining the advanced features of the
WIT2410 OEM module, there is a HN 10 Series modem that suits every need, from the relative comfort of an
office to the harsh conditions on the factory floor to the unpredictable weather of an outdoor location.
HN1010
HN-1510
HN2010
HN-3010
Based on 2.4GHz frequency hopping spread spectrum technology, all HN 10 Series modems provide
extraordinary range while providing immunity to jamming and multipath fading. All backed by extensive
experience in wireless technology. All HN 10 Series standalone modems feature a high data rate (460Kbps
over the air) and long range (over 5 miles using HN 10 external gain antennas). Both point-to-point and point-
to-multi-point network configurations are supported.
2.4 GHz Stand-
Alone Modems
HN-1010
HN-3010
HN510
HN-2010
HN-1510
HN-1010
HN-510
The HN-510 has the same
components as its
HN-3010
The HN-3010 is a compact
HN-2010
HN-1510
The HN-1010 is enclosed in
a NEMA 4X and I.P. 66 rated
housing and can operate
outdoors from
-30OC to +70OC. The unit
features a 9 pin I/O
connector for data, power,
and flow control. Transmit
and receive data are RS-
485 compatible differential
signals while the flow control
lines are single-ended
RS-232. This interface can
drive up to 250 feet of cable
and can be converted to
plain RS-232 using the
HopNet 3500 data/power
adapter.
The HN-2010 is a dual
wireless modem repeater
that can be used to create
complex extended range
networks, either point-to-
point or point-to-multi-point.
Half and full duplex I/O rates
from 1200bps to 230.4Kbps
are supported. The HN-
2010 is housed in a NEMA
4X and I.P. 66 rated
The HN-1510 features a
rugged enclosure for indoor
industrial applications. The
HN-1510 has a standard
DB-9 connector for I/O and
all data and flow control
lines are RS-232 signals.
Power is supplied via a
separate 2-pin connector.
The HN-1510 also provides
a 4 LED readout for power
and status indications.
stand-alone modem with an
integrated patch antenna.
Housed in a NEMA 4X and
I.P. 66 enclosure, the HN-
3010 is a cost-effective,
one-piece, pole-mounted
transceiver. The HN-3010
has an operating
temperature range of -30OC
to +70OC. A single 9 pin
connector provides data,
flow control, and power.
Data signals are differential
RS-485 compatible, while
the flow control lines are RS-
232.
ruggedized siblings in a
desktop-style enclosure that
provides compact size and
weight with a built-in
rechargeable battery pack.
Simply connect to a PC’s
RS-232 port using the 510’s
DB-9 connector and it’s
ready to go. Front panel
LEDs give complete power
and communications status
at a glance.
enclosure for outdoor
operation between -30OC
and +70OC. A standard
DB-9 data connector is
provided to allow
configuration of the
repeater. Because two
wireless modems are used
back-toback, the full
throughput of the data
channel is available. Single
modem, store and forward
repeaters reduce the
throughput of the entire
system and add latency.
www.RFM.com E-mail: info@rfm.com
©2008 by RF Monolithics, Inc.
Page 1 of 2
HN 10 - 4/10/08