HIP6019B
TM
Data Sheet
October 1998
FN4587
Advanced Dual PWM and Dual Linear
Power Control
Features
• Provides 4 Regulated Voltages
The HIP6019B provides the power control and protection for
four output voltages in high-performance microprocessor and
computer applications. The IC integrates two PWM
- Microprocessor Core, I/O, Clock Chip and GTL Bus
• Drives N-Channel MOSFETs
controllers, a linear regulator and a linear controller as well as
the monitoring and protection functions into a single 28 lead
SOIC package. One PWM controller regulates the
microprocessor core voltage with a synchronous-rectified
buck converter, while the second PWM controller supplies the
computer’s 3.3V power with a standard buck converter. The
linear controller regulates power for the GTL bus and the
linear regulator provides power for the clock driver circuits.
• Operates from +5V and +12V Inputs
• Simple Single-Loop Control Designs
- Voltage-Mode PWM Control
• Fast Transient Response
- High-Bandwidth Error Amplifiers
- Full 0% to 100% Duty Ratios
• Excellent Output Voltage Regulation
The HIP6019B includes an Intel-compatible, TTL 5-input
digital-to-analog converter (DAC) that adjusts the core PWM
output voltage from 2.1VDC to 3.5VDC in 0.1V increments
and from 1.3VDC to 2.05VDC in 0.05V steps. The precision
reference and voltage-mode control provide ±1% static
regulation. The second PWM controller is user-adjustable for
output levels between 3.0V and 3.5V with ±2% accuracy. The
adjustable linear regulator uses an internal pass device to
provide 2.5V ±2.5%. The adjustable linear controller drives an
external N-Channel MOSFET to provide 1.5V ±2.5%.
- Core PWM Output: ±1% Over Temperature
- I/O PWM Output: ±2% Over Temperature
- Other Outputs: ±2.5% Over Temperature
• TTL-Compatible 5-Bit Digital-to-Analog Core Output
Voltage Selection
- Wide Range . . . . . . . . . . . . . . . . . . . 1.3V
- 0.1V Steps . . . . . . . . . . . . . . . . . . . . 2.1V
to 3.5V
to 3.5V
DC
DC
DC
DC
DC
- 0.05V Steps . . . . . . . . . . . . . . . . . . 1.3V
to 2.05V
DC
The HIP6019B monitors all the output voltages. A single
Power Good signal is issued when the core is within ±10% of
the DAC setting and the other levels are above their under-
voltage levels. Additional built-in over-voltage protection for
the core output uses the lower MOSFET to prevent output
voltages above 115% of the DAC setting. The PWM
• Power-Good Output Voltage Monitor
• Microprocessor Core Voltage Protection Against Shorted
MOSFET
• Over-Voltage and Over-Current Fault Monitors
- Does Not Require Extra Current Sensing Element,
controller’s over-current functions monitor the output current
by sensing the voltage drop across the upper MOSFET’s
Uses MOSFET’s r
DS(ON)
r
, eliminating the need for a current sensing resistor.
DS(ON)
• Small Converter Size
- Constant Frequency Operation
Pinout
- 200kHz Free-Running Oscillator; Programmable from
50kHz to 1MHz
HIP6019B
(SOIC)
TOP VIEW
Applications
UGATE2
PHASE2
VID4
1
2
3
4
5
6
7
8
9
28 VCC
•
•
Full Motherboard Power Regulation for Computers
Low-Voltage Distributed Power Supplies
27 UGATE1
26 PHASE1
25 LGATE1
24 PGND
23 OCSET1
22 VSEN1
21 FB1
VID3
Ordering Information
VID2
o
VID1
PART NUMBER
TEMP. ( C)
PACKAGE
PKG. NO.
VID0
HIP6019BCB
0 to 70
28 Ld SOIC
M28.3
PGOOD
OCSET2
20 COMP1
19 FB3
FB2 10
COMP2 11
SS 12
18 GATE3
17 GND
16 VOUT4
15 VSEN2
FAULT/RT 13
FB4 14
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2002. All Rights Reserved
267