HIP6005A
Data Sheet
September 1997
File Number 4418.1
Buck Pulse-Width Modulator (PWM)
Controller and Output Voltage Monitor
Features
• Drives N-Channel MOSFET
The HIP6005A provides complete control and protection for
a DC-DC converter optimized for high-performance
microprocessor applications. It is designed to drive an
N-Channel MOSFET in a standard buck topology. The
HIP6005A integrates all of the control, output adjustment,
monitoring and protection functions into a single package.
• Operates from +5V or +12V Input
• Simple Single-Loop Control Design
- Voltage-Mode PWM Control
• Fast Transient Response
- High-Bandwidth Error Amplifier
- Full 0% to 100% Duty Ratio
The output voltage of the converter is easily adjusted and
precisely regulated. The HIP6005A includes a fully TTL-
compatible 5-input digital-to-analog converter (DAC) that
• Excellent Output Voltage Regulation
- ±1% Over Line Voltage and Temperature
adjusts the output voltage from 2.1V
to 3.5V
in 0.1V
in 0.05V steps.
DC
to 2.05V
DC
• TTL-Compatible 5-Bit Digital-to-Analog Output Voltage
Selection
increments and from 1.8V
DC
DC
The precision reference and voltage-mode regulator hold the
selected output voltage to within ±1% over temperature and
line voltage variations.
- Wide Range . . . . . . . . . . . . . . . . . . . 1.8V
- 0.1V Binary Steps. . . . . . . . . . . . . . . 2.1V
to 3.5V
to 3.5V
DC
DC
DC
DC
DC
- 0.05V Binary Steps. . . . . . . . . . . . . 1.8V
to 2.05V
DC
The HIP6005A provides simple, single feedback loop, voltage-
mode control with fast transient response. It includes a
200kHz free-running triangle-wave oscillator that is adjustable
from below 50kHz to over 1MHz. The error amplifier features
a 15MHz gain-bandwidth product and 6V/µs slew rate which
enables high converter bandwidth for fast transient
performance. The resulting PWM duty ratio ranges from 0% to
100%.
• Power-Good Output Voltage Monitor
• Over-Voltage and Over-Current Fault Monitors
- Does Not Require Extra Current Sensing Element,
Uses MOSFET’s r
DS(ON)
• Small Converter Size
- Constant Frequency Operation
- 200kHz Free-Running Oscillator Programmable from
50kHz to over 1MHz
The HIP6005A monitors the output voltage with a window
comparator that tracks the DAC output and issues a Power
Good signal when the output is within ±10%. The HIP6005A
protects against over-current and over-voltage conditions by
inhibiting PWM operation. Additional built-in over-voltage
protection triggers an external SCR to crowbar the input
supply. The HIP6005A monitors the current by using the
Applications
• Power Supply for Pentium®, Pentium Pro, Pentium II,
PowerPC™, K6™, 6X86™ and Alpha™ Microprocessors
High-Power 5V to 3.xV DC-DC Regulators
Low-Voltage Distributed Power Supplies
•
•
r
of the upper MOSFET which eliminates the need for
DS(ON)
a current sensing resistor.
Pinout
Ordering Information
HIP6005A
(SOIC)
TOP VIEW
TEMP.
PKG.
NO.
o
PART NUMBER RANGE ( C)
PACKAGE
20 Ld SOIC
HIP6005ACB
0 to 70
M20.3
1
2
3
4
5
6
7
8
9
R
T
V
20
19
SEN
OCSET
SS
OVP
18 V
CC
VID0
VID1
VID2
VID3
VID4
COMP
17 NC
16 NC
15 BOOT
14 UGATE
13 PHASE
6X86™ is a trademark of Cyrix Corporation.
Alpha™ is a trademark of Digital Equipment Corporation.
K6™ is a trademark of Advanced Micro Devices, Inc.
Pentium® is a registered trademark of Intel Corporation.
PowerPC™ is a trademark of IBM.
12
PGOOD
FB 10
11 GND
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
http://www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999
2-98