HIP6006
®
Data Sheet
April 1, 2005
FN4306.3
Buck and Synchronous-Rectifier
Features
• Drives Two N-Channel MOSFETs
Pulse-Width Modulator (PWM) Controller
The HIP6006 provides complete control and protection for a
DC-DC converter optimized for high-performance
microprocessor applications. It is designed to drive two
N Channel MOSFETs in a synchronous-rectified buck
topology. The HIP6006 integrates all of the control, output
adjustment, monitoring and protection functions into a single
package.
• Operates From +5V or +12V Input
• Simple Single-Loop Control Design
- Voltage-Mode PWM Control
• Fast Transient Response
- High-Bandwidth Error Amplifier
- Full 0% to 100% Duty Ratio
The output voltage of the converter can be precisely
regulated to as low as 1.27V, with a maximum tolerance of
±1% over temperature and line voltage variations.
• Excellent Output Voltage Regulation
- 1.27V Internal Reference
- ±1% Over Line Voltage and Temperature
The HIP6006 provides simple, single feedback loop, voltage-
mode control with fast transient response. It includes a
200kHz free-running triangle-wave oscillator that is
adjustable from below 50kHz to over 1MHz. The error
amplifier features a 15MHz gain-bandwidth product and
6V/µs slew rate which enables high converter bandwidth for
fast transient performance. The resulting PWM duty ratio
ranges from 0% to 100%.
• Over-Current Fault Monitor
- Does Not Require Extra Current Sensing Element
- Uses MOSFETs r
DS(ON)
• Small Converter Size
- Constant Frequency Operation
- 200kHz Free-Running Oscillator Programmable from
50kHz to Over 1MHz
The HIP6006 protects against over-current conditions by
inhibiting PWM operation. The HIP6006 monitors the current
• 14 Pin, SOIC and TSSOP Package
• Pb-Free Available (RoHS Compliant)
by using the r
of the upper MOSFET which eliminates
DS(ON)
the need for a current sensing resistor.
Applications
• Power Supply for Pentium®, Pentium Pro, PowerPC™
Pinout
and Alpha™ Microprocessors
HIP6006
(SOIC, TSSOP)
TOP VIEW
• High-Power 5V to 3.xV DC-DC Regulators
• Low-Voltage Distributed Power Supplies
14
13
12
11
10
9
RT
OCSET
SS
1
2
3
4
5
6
7
VCC
Ordering Information
PVCC
LGATE
PGND
BOOT
UGATE
PHASE
TEMP.
PKG.
o
PART NUMBER
HIP6006CB
RANGE ( C)
0 to 70
PACKAGE
14 Ld SOIC
DWG. #
COMP
FB
M14.15
EN
HIP6006CB-T
0 to 70
14 Ld SOIC) (T&R) M14.15
14 Ld SOIC (Pb-free) M14.15
8
GND
HIP6006CBZ (Note)
0 to 70
HIP6006CBZ-T
(Note)
0 to 70
14 Ld SOIC) (T&R) M14.15
(Pb-free)
HIP6006CV
0 to 70
0 to 70
14 Ld TSSOP
M14.173
HIP6006CV-T
14 Ld TSSOP (T&R) M14.173
NOTE: Intersil Pb-free products employ special Pb-free material sets;
molding compounds/die attach materials and 100% matte tin plate
termination finish, which are RoHS compliant and compatible with both
SnPb and Pb-free soldering operations. Intersil Pb-free products are
MSL classified at Pb-free peak reflow temperatures that meet or exceed
the Pb-free requirements of IPC/JEDEC J STD-020.
PowerPC™ is a trademark of IBM.
Alpha™ is a trademark of Digital Equipment Corporation.
Pentium® is a registered trademark of Intel Corporation.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-352-6832 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2001, 2005. All Rights Reserved
1
All other trademarks mentioned are the property of their respective owners.