HIP6008
Data Sheet
March 2000
File Number 4281.2
Buck Pulse-Width Modulator (PWM)
Controller and Output Voltage Monitor
Features
• Drives N-Channel MOSFET
The HIP6008 provides complete control and protection for a
DC-DC converter optimized for high-performance
microprocessor applications. It is designed to drive an
N-Channel MOSFET in a standard buck topology. The
HIP6008 integrates all of the control, output adjustment,
monitoring and protection functions into a single package.
• Operates From +5V or +12V Input
• Simple Single-Loop Control Design
- Voltage-Mode PWM Control
• Fast Transient Response
- High-Bandwidth Error Amplifier
- Full 0% to 100% Duty Ratio
The output voltage of the converter is easily adjusted and
precisely regulated. The HIP6008 includes a 4-Input Digital-
to-Analog Converter (DAC) that adjusts the output voltage
from 2.0VDC to 3.5VDC in 0.1V increments. The precision
reference and voltage-mode regulator hold the selected
output voltage to within ±1.5% over temperature and line
voltage variations.
• Excellent Output Voltage Regulation
- ±1.5% Over Line Voltage and Temperature
• 4 Bit Digital-to-Analog Output Voltage Selection
- Wide Range . . . . . . . . . . . . . . . . . . .2.0VDC to 3.5VDC
- 0.1V Binary Steps
The HIP6008 provides simple, single feedback loop, voltage-
mode control with fast transient response. It includes a
200kHz free-running triangle-wave oscillator that is
adjustable from below 50kHz to over 1MHz. The error
amplifier features a 15MHz gain-bandwidth product and
6V/µs slew rate which enables high converter bandwidth for
fast transient performance. The resulting PWM duty ratio
ranges from 0% to 100%.
• Power-Good Output Voltage Monitor
• Over-Voltage and Over-Current Fault Monitors
- Does Not Require Extra Current Sensing Element
- Uses MOSFET’s r
DS(ON)
• Small Converter Size
- Constant Frequency Operation
- 200kHz Free-Running Oscillator Programmable from
50kHz to over 1MHz
The HIP6008 monitors the output voltage with a window
comparator that tracks the DAC output and issues a Power
Good signal when the output is within ±10%. The HIP6008
protects against over-current conditions by inhibiting PWM
operation. Built-in over-voltage protection triggers an
external SCR to crowbar the input supply. The HIP6008
Applications
•
Power Supply for Pentium®, Pentium Pro, PowerPC™ and
Alpha™ Microprocessors
•
•
High-Power 5V to 3.xV DC-DC Regulators
Low-Voltage Distributed Power Supplies
monitors the current by using the r
of the upper
DS(ON)
MOSFET which eliminates the need for a current sensing
resistor.
Ordering Information
Pinout
TEMP.
PKG.
NO.
o
HIP6008
(SOIC)
TOP VIEW
PART NUMBER RANGE ( C)
PACKAGE
16 Ld SOIC
HIP6008CB
0 to 70
M16.15
OCSET
SS
1
2
3
4
5
6
7
8
16 VSEN
15 RT/OVP
14 VCC
VID0
VID1
VID2
VID3
COMP
FB
13 BOOT
12 UGATE
11 PHASE
10 PGOOD
9
GND
Alpha™ is a trademark of Digital Equipment Corporation.
Pentium® is a registered trademark of Intel Corporation.
PowerPC™ is a trademark of IBM.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 2000
1