HIN201 thru HIN213
TM
Data Sheet
May 2000
File Number 3980.8
+5V Powered RS-232
Features
Transmitters/Receivers with 0.1Microfarad
External Capacitors
• Meets All RS-232E and V.28 Specifications
• HIN203 and HIN205 Require No External Capacitors
• Requires Only 0.1µF or Greater External Capacitors
• High Data Rate. . . . . . . . . . . . . . . . . . . . . . . . . . .120kbit/s
• Two Receivers Active in Shutdown Mode (HIN213)
The HIN201-HIN213 family of RS-232 transmitters/receivers
interface circuits meet all ElA RS-232E and V.28
specifications, and are particularly suited for those
applications where ±12V is not available. They require a
single +5V power supply (except HIN201) and feature
onboard charge pump voltage converters which generate
+10V and -10V supplies from the 5V supply. The HIN203
and HIN205 require no external capacitors and are ideally
suited for applications where circuit board space is critical.
The family of devices offers a wide variety of RS-232
transmitter/receiver combinations to accommodate various
applications (see Selection Table).
• Requires Only Single +5V Power Supply
- (+5V and +12V - HIN201)
• Onboard Voltage Doubler/Inverter
• Low Power Consumption (Typ) . . . . . . . . . . . . . . . . . 5mA
• Low Power Shutdown Function (Typ) . . . . . . . . . . . . 1µA
• Three-State TTL/CMOS Receiver Outputs
The HIN205, HIN206, HIN211 and HIN213 feature a low
power shutdown mode to conserve energy in battery
powered applications. In addition, the HIN213 provides two
active receivers in shutdown mode allowing for easy
“wakeup” capability.
• Multiple Drivers
- ±10V Output Swing for +5V lnput
- 300Ω Power-Off Source Impedance
- Output Current Limiting
- TTL/CMOS Compatible
The drivers feature true TTL/CMOS input compatibility, slew
rate-limited output, and 300Ω power-off source impedance.
The receivers can handle up to ±30V input, and have a 3kΩ
to 7kΩ input impedance. The receivers also feature
hysteresis to greatly improve noise rejection.
- 30V/µs Maximum Slew Rate
• Multiple Receivers
- ±30V Input Voltage Range
- 3kΩ to 7kΩ Input Impedance
- 0.5V Hysteresis to Improve Noise Rejection
Applications
• Any System Requiring RS-232 Communications Port
- Computer - Portable, Mainframe, Laptop
- Peripheral - Printers and Terminals
- Instrumentation
- Modems
Selection Table
NUMBER OF
0.1µF
EXTERNAL
CAPACITORS
NUMBER OF
RECEIVERS
ACTIVE IN
NUMBER OF
RS-232
DRIVERS
NUMBER OF
RS-232
RECEIVERS
LOW POWER
SHUTDOWN/TTL
THREE-STATE
PART
NUMBER
POWER SUPPLY
VOLTAGE
SHUTDOWN
HIN201
+5V and +9V to 13.2V
2
2
2
5
4
5
4
4
4
2
2
2
5
3
3
4
5
5
2 Capacitors
4 Capacitors
None
No/No
No/No
0
0
0
0
0
0
0
0
2
HIN202
HIN203
HIN205
HIN206
HIN207
HIN208
HIN211
HIN213
+5V
+5V
+5V
+5V
+5V
5V
No/No
None
Yes/Yes
Yes/Yes
No/No
4 Capacitors
4 Capacitors
4 Capacitors
4 Capacitors
4 Capacitors
No/No
+5V
+5V
Yes/Yes
Yes/Yes
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil and Design is a trademark of Intersil Corporation. | Copyright © Intersil Corporation 2000
3-1