The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Ribbon Cable Connector
HIF4 Series
■Features
1. Current Capacity
The HIF4 series connector is capable of 3 A current capacity used
for wider applications, while the HIF3 series uses 1 A capacity.
2. Full Lock Mechanism
This connector is equipped with a Hirose original locking
mechanism, and guarantees excellent reliability for vibration and
shock.
3. One-touch Insertion and Extraction Mechanism
This connector is equipped with levers for automatic insertion and
extraction, as soon as lock is reset. Insertion and extraction tools
are not required.
4. Applicable Cable
The applicable cable is UL2651 AWG#24 flat cable (7
cores./0.203mm, jacket dia :1.0 to 1.2mm).
■Applications
Computers, terminal equipment, various kinds of electronic equipment, and office automation machines
■Product Specifications
(
)
(
)
Current rating : 3A
Operating Temperature Range
:
–55 to +85ç Note 1 Storage Temperature Range : –10 to +60ç Note 2
Rating
(
)
Voltage rating : 300V AC Operating Moisture Range : 40 to 80%
Storage Humidity Range : 40 to 70% Note 2
Item
Specification
Condition
1. Insulation Resistance 1000M ohms min
500V DC
2. Withstanding voltage No flashover or insulation breakdown.
1000V AC/1 minute
0.1A
3. Contact Resistance
4. Vibration
15m ohms max
No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of 40ç and humidity of 90% to 95%
(-65ç: 30 minutes ■■15 to 35ç: 5 minutes max.
125ç: 30 minutes ■ 15 to 35ç: 5 minutes max.) 5 cycles
500 cycles
5. Humidity (Steady state) Insulation resistance: 1000M ohms min.
6. Temperature Cycle
7. Operating Life
No damage, cracks, or parts looseness.
Contact resistance: 15m ohms max.
Solder bath: 260ç for 10 seconds
8. Resistance to Soldering heat No deformation of components affecting performance.
Manual soldering: 360ç for 5 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 3: Information contained in this catalog represents general requirements for this Series.Contact us for the drawings and specifications for
a specific part number shown.
Note 4: Please note that there is a risk of deforming the lock when an excessive load is applied to the inside.
■Material
Part
Material
PBT
Finish
Remarks
UL94V-0
Insulator
Black
Socket
Beryllium copper
Phosphor bronze
Gold plated over nickel underplating
Gold plated over nickel underplating
Contact
–––––––
Pin header
B2