APPLICABLE STANDARD
OPERATING
STORAGE
TEMPERATURE RANGE
-55 C TO 85 C(1)
200 V AC
1 A
TEMPERATURE RANGE
OPERATING HUMIDITY
RANGE
-10 C TO 60 C (2)
RATING VOLTAGE
CURRENT
RELATIVE HUMIDITY 85% MAX
(NOT DEWED)
STORAGE HUMIDITY
RANGE
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION VISUALLY AND BY MEASURING INSTRUMENT.
ACCORDING TO DRAWING.
×
×
×
×
MARKING CONFIRMED VISUALLY.
ELECTRIC CHARACTERISTICS
CONTACT RESISTANCE
INSULATION
RESISTANCE
100 mA (DC or 1000 Hz).
15 mΩ MAX .
1000 MΩ MIN.
×
×
-
-
500 V DC.
VOLTAGE PROOF
650 V AC FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
×
×
-
-
MECHANICAL CHARACTERISTICS
MECHANICAL
OPERATION
500 TIMES INSERTIONS AND EXTRACTIONS.
① CONTACT RESISTANCE: 15 m MAX.
② NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
VIBRATION
SHOCK
FREQUENCY 10 TO 55 TO 10Hz, APPROX 5min
SINGLE AMPLITUDE : 0.75 mm, 10 CYCLES
FOR 3 AXIAL DIRECTIONS.
490 m/s2, DURATION OF PULSE 11 ms
AT 3 TIMES FOR 3 BOTH AXIAL DIRECTIONS.
① NO ELECTRICAL DISCONTINUITY OF
1 s.
② NO DAMAGE, CRACK AND LOOSENESS
×
×
-
-
OF PARTS.
ENVIRONMENTAL CHARACTERISTICS
DAMP HEAT
EXPOSED AT 40±2 C, 90 ~ 95 %, 96 h. ① CONTACT RESISTANCE: 15 m MAX.
×
×
-
-
(STEADY STATE)
RAPID CHANGE OF
TEMPERATURE
② INSULATION RESISTANCE:1000 M
MIN.
TEMPERATURE -55 → +125 C
③ NO DAMAGE, CRACK AND LOOSENESS
TIME
UNDER
30 → 30 min
5 CYCLES.
OF PARTS.
(RELOCATION TIME TO CHANBER:WITHIN2~3MIN)
DRY HEAT
EXPOSED AT 85℃, 96h
① CONTACT RESISTANCE: 15 m MAX.
② NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
×
×
×
-
-
-
COLD
EXPOSED AT -55℃, 96h
HYDROGEN SULPHIDE
EXPOSED AT 25±2℃, 75±5%RH, 25PPM FOR
96 h.
① CONTACT RESISTANCE: 15 m MAX.
② NO HEAVY CORROSION.
(TEST STANDARD :JIS C 60068)
CORROSION SALT MIST EXPOSED IN 5 % SALT WATER SPRAY FOR 48 h. NO HEAVY CORROSION
×
×
-
-
RESISTANCE TO
SOLDERING HEAT
1) SOLDER BATH:SOLDER TEMPERATURE,
260±5℃ FOR IMMERSION,DURATION,10±1s.
2) SOLDERING IRONS : 360℃ FOR 5 s MAX.
NO DEFORMATION OF CASE OF
EXCESSIVE LOOSENESS OF THE
TERMINALS.
×
×
-
-
SOLDERABILITY
SOLDERED AT SOLDER TEMPERATURE,
245±3C, FOR IMMERSION DURATION,
A NEW UNIFORM COATING OF SOLDER
SHALL COVER A MINIMUM OF 95 % OF
THE SURFACE BEING IMMERSED.
2 s.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
(1) TEMPERATURE RISE INCLUDED WHEN ENERGIZED.
(2) THIS STORAGE INDICATES A LONG-TERM STORAGE STATE
FOR THE UNUSED PRODUCT BEFORE THE BOARD MOUNTED.
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
HT.YAMAGUCHI
HT.YAMAGUCHI
HR.NAGAYASU
TS.HORI
20181210
20181210
20181207
20181207
Unless otherwise specified, refer to JIS-C-5402.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-386226-00-00
HIF3M*W-*PA-2.54DSA(63)
SPECIFICATION SHEET
0
△
1/1
HIROSE ELECTRIC CO., LTD.
FORM HD0011-2-1