2.54mm Connectors Directly Mounted on Board
HIF2E Series
■Features
1. Directly Mounted on Board
This connector can be directly mounted on the board using the
1.27mm pitch flat cable.
2. Variation in Number of Contacts
10, 14, 16, 20, 26, 30, 34, 40, 50, and 60 contacts, are available
3. Applicable Cable
The applicable cable is UL2651 28 AWG flat cable
(7 cores/0.127mm, jacket dia. : 0.8 to 1.0mm).
■Product Specifications
(
)
(
)
Current rating : 1A
Operating Temperature Range
:
–55 to +85ç Note 1 Storage Temperature Range : –10 to +60ç Note 2
Rating
(
)
Voltage rating : 200V AC Operating Moisture Range : 40 to 80%
Storage Humidity Range : 40 to 70% Note 2
Item
Specification
Condition
1. Insulation Resistance 1000MΩ min
500V DC
2. Withstanding voltage No flashover or insulation breakdown.
650V AC/1 minute
0.1A
3. Contact Resistance
4. Vibration
15mΩ max
No electrical discontinuity of 1μs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of 40ç and humidity of 90% to 95%
(-65ç : 30 minutes ➝ 15 to 35ç : 5 minutes max.
125ç : 30 minutes ➝ 15 to 35ç : 5 minutes max.) 5 cycles
Solder bath : 260ç for 10 seconds
5. Humidity (Steady state) Insulation resistance : 1000MΩ min.
6. Temperature Cycle No damage, cracks, or parts looseness.
7. Resistance to Soldering heat No deformation of components affecting performance.
Manual soldering : 360ç for 5 seconds
Note 1 : Includes temperature rise caused by current flow.
Note 2 : The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
■Materials / Finish
Part
Material
PBT
Finish
HIF2E-*D-2.54R B
Remarks
UL94V-0
Black
Gray
Insulator
HIF2E-*D-2.54R A
Contact
Copper alloy
Gold plated over nickel underplated
––––––
Product Number Structure
■
Refer to the chart below when determining the product specifications from the product number.
Please select from the product numbers listed in this catalog when placing orders.
*
w
HIF2E -
q
D - 2.54 RB
e
r
t
q Series Name
w Number of Contacts : 10, 14, 16, 20, 26, 30, 34, 40, 50, and 60
e Contact alignment : D : Double
: HIF2E
t Connection method and contact plating type
RB : Universal type circuit plated
RA : Hirose original circuit plated
r Contact Pitch
: 2.54mm
B9