HI-303
®
Data Sheet
November 17, 2004
FN3125.10
Dual, SPDT CMOS Analog Switch
Features
The HI-303 switch is a monolithic device fabricated using
CMOS technology and the Intersil dielectric isolation
process. This switch features break-before-make switching,
low and nearly constant ON resistance over the full analog
signal range, and low power dissipation.
• Analog Signal Range (±15V Supplies) . . . . . . . . . . ±15V
o
• Low Leakage at 25 C . . . . . . . . . . . . . . . . . . . . . . . 40pA
o
• Low Leakage at 125 C . . . . . . . . . . . . . . . . . . . . . . . 1nA
o
• Low On Resistance at 25 C . . . . . . . . . . . . . . . . . . . 35Ω
The HI-303 is TTL compatible and has a logic “0” condition
with an input less than 0.8V and a logic “1” condition with an
input greater than 4V. (See pinouts for switch conditions with
a logic “1” input.)
• Break-Before-Make Delay . . . . . . . . . . . . . . . . . . . . 60ns
• Charge Injection . . . . . . . . . . . . . . . . . . . . . . . . . . . 30pC
• TTL, CMOS Compatible
• Symmetrical Switch Elements
Functional Diagram
S
• Low Operating Power (Typ) . . . . . . . . . . . . . . . . . . . . 1.0mW
• Pb-Free Available (RoHS Compliant)
IN
N
P
D
Applications
• Sample and Hold (i.e., Low Leakage Switching)
• Op Amp Gain Switching (i.e., Low On Resistance)
• Portable, Battery Operated Circuits
• Low Level Switching Circuits
Pinout Switch States Shown For A Logic “1” Input
HI-303 (PDIP, CERDIP, SOIC)
TOP VIEW
NC
1
2
3
4
5
6
14
13
12
11
10
9
V+
• Dual or Single Supply Systems
S
3
S
4
D
3
D
4
Ordering Information
D
1
D
2
PART
NUMBER
TEMP.
PKG. DWG.
#
S
1
S
2
o
RANGE ( C)
-55 to 125
0 to 75
PACKAGE
14 Ld CERDIP
14 Ld CERDIP
14 Ld PDIP
IN
1
IN
2
HI1-0303-2
HI1-0303-5
HI3-0303-5
F14.3
F14.3
E14.3
E14.3
GND 7
8
V-
0 to 75
LOGIC
SW1, SW2 SW3, SW4
HI3-0303-5Z
(See Note)
0 to 75
14 Ld PDIP
(Pb-free)
0
1
OFF
ON
ON
HI9P0303-9
-40 to 85
-40 to 85
14 Ld SOIC
M14.15
M14.15
OFF
HI9P0303-9Z
(See Note)
14 Ld SOIC
(Pb-free)
NOTE: Intersil Pb-free products employ special Pb-free material sets;
molding compounds/die attach materials and 100% matte tin plate
termination finish, which are RoHS compliant and compatible with
both SnPb and Pb-free soldering operations. Intersil Pb-free products
are MSL classified at Pb-free peak reflow temperatures that meet or
exceed the Pb-free requirements of IPC/JEDEC J STD-020C.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2003, 2004. All Rights Reserved
1
All other trademarks mentioned are the property of their respective owners.