DATASHEET
HI7191
FN4138
Rev 8.00
June 1, 2006
24-Bit, High Precision, Sigma Delta A/D Converter
The Intersil HI7191 is a monolithic instrumentation, sigma
delta A/D converter which operates from 5V supplies. Both
the signal and reference inputs are fully differential for
maximum flexibility and performance. An internal
Features
• 20-Bit Resolution with No Missing Code
• 0.0015% Integral Non-Linearity (Typ)
• 20mV to 2.5V Full Scale Input Ranges
• Internal PGIA with Gains of 1 to 128
Programmable Gain Instrumentation Amplifier (PGIA)
provides input gains from 1 to 128 eliminating the need for
external pre-amplifiers. The on-demand converter
auto-calibrate function is capable of removing offset and gain
errors existing in external and internal circuitry. The on-board
user programmable digital filter provides over 120dB of
60/50Hz noise rejection and allows fine tuning of resolution
and conversion speed over a wide dynamic range. The
HI7190 and HI7191 are functionally the same device, but the
HI7190 has tighter linearity specs.
• Serial Data I/O Interface, SPI Compatible
• Differential Analog and Reference Inputs
• Internal or System Calibration
• 120dB Rejection of 60/50Hz Line Noise
• Settling Time of 4 Conversions (Max) for a Step Input
• Pb-Free Plus Anneal Available (RoHS Compliant)
The HI7191 contains a serial I/O port and is compatible with
most synchronous transfer formats including both the
Motorola 6805/11 series SPI and Intel 8051 series SSR
protocols. A sophisticated set of commands gives the user
control over calibration, PGIA gain, device selection, standby
mode, and several other features. The On-chip Calibration
Registers allow the user to read and write calibration data.
Applications
• Process Control and Measurement
• Industrial Weight Scales
• Part Counting Scales
• Laboratory Instrumentation
• Seismic Monitoring
Ordering Information
TEMP.
PART
NUMBER
PART
MARKING
RANGE
(°C)
PKG.
DWG. #
• Magnetic Field Monitoring
PACKAGE
Related Literature
HI7191IP
HI7191IP
-40 to 85 20 Ld PDIP
E20.3
• Technical Brief TB363 “Guidelines for Handling and
Processing Moisture Sensitive Surface Mount Devices
(SMDs)”
HI7191IPZ
(See Note)
HI7191IPZ
-40 to 85 20 Ld PDIP* E20.3
(Pb-free)
HI7191IB
HI7191IB
-40 to 85 20 Ld SOIC
M20.3
M20.3
• TB348 “HI7190/1 Negative Full Scale Error vs
Conversion Frequency”
HI7191IBZ
(See Note)
HI7191IBZ
-40 to 85 20 Ld SOIC
(Pb-free)
• AN9504 “A Brief Intro to Sigma Delta Conversion”
• TB329 “Intersil Sigma Delta Calibration Technique”
• AN9505 “Using the HI7190 Evaluation Kit”
HI7191IBZ-T HI7191IBZ
(See Note)
-40 to 85 20 Ld SOIC
Tape and Reel
(Pb-free)
M20.3
HI7190EVAL Evaluation Kit
• TB331 “Using the HI7190 Serial Interface”
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
• AN9527 “Interfacing HI7190 to a Microcontroller”
• AN9532 “Using HI7190 in a Multiplexed System”
• AN9601 “Using HI7190 with a Single +5V Supply”
*Pb-free PDIPs can be used for through hole wave solder processing
only. They are not intended for use in Reflow solder processing
applications.
FN4138 Rev 8.00
June 1, 2006
Page 1 of 25