SUBMINIATURE HIGH INSULATION RELAY
HFD3-VI
Features
Third generation Signal relay
●
●
●
●
2 Form A and 2 Form C configurations
File No.:E133481
High contact swtiching capacity:10mA 1000VDC/1500VDC
SMT and DIP types available
●Single side stable and latching type available
File No.:R 50433438
6kV dielectric strength (between coil and contacts),
Meet ITU-T K.21 requirement
●
2 pairs of NO contacts connected in series with contact
gap ≥1.5mm,product in accordance to IEC62776-1
available.
●
File No.:CQC19002231071
RoHS compliant
CONTACT DATA
CHARACTERISTICS
2A/2C
≤100m (10mA 30mVDC)
AgNi+ Au plated
Insulation resistance
1000M (500VDC)
1500VAC 1min
1500VAC 1min
4000VAC 1min
Contact arrangement
Contact resistance1)
Between open contacts
Dielectric
Between contact sets
strength
Contact material
2A 30VDC
1A 277VAC
10mA 1500VDC
10mA 1000VDC
Between coil&contact
Contact rating
(Res. load)
Surge withstand voltage
Between open contacts (10/160µs)
Between coil & contacts (1.2/50µs)
Between coil & contacts (10/700µs)
2.5kV
6kV
6kV2)
≤6ms
1100VAC/1500VDC(Two sets of open
contacts in series)
Max. switching voltage
600VAC/800VDC(Single contact)
Operate time (Set time)
Max. switching current
Max. switching power
Min. applicable load2)
Mechanical endurance
4A
277VA / 60W
10mV 10uA
1 x 107OPS
Release time (Reset time)
≤6ms
-40 to 85
Ambient temperature
3)
-40 to 105
Humidity
5% to 85% RH
735m/s2
1 x 105ops(Resistive load 85 2A 30VDC)
5 x 104ops(Resistive load 85 1A 277VAC)
5 x 104ops(Resistive load 105
Shock
Functional
980m/s2
resistance
Destructive
Electrical endurance
3)
10mA 1000VDC)
3 x 104ops(Resistive load 105
Vibration
Functional
Destructive
10Hz to 55Hz 3.3mm DA
10Hz to 55Hz 5.0mm DA
DIP、SMT
3)
10mA 1500VDC)
resistance
Termination
Notes: 1) The data shown above are initial values.
2) Min. applicable load is reference value. Please perform the
confirmation test with the actual load before production since
reference value may change according to switching frequencies,
environmental conditions and expected contact resistance
and reliability.
Approx.2g
Unit weight
Moisture sensitivity levels (Only for
SMT type, JEDEC-STD-020)
3) Two sets of open contacts or two sets of closed contacts in Series.
Two sets of open contacts in Series:
MSL-3
Plastic
Construction
1
4
5
8
6
Notes: 1) The data shown above are initial values.
2) Product with 907 suffix, meet ITU-T K.21 requirement on
surge voltage.
12
9
7
3) Product with 888 suffix is for application at 105
.
4) Please see more details in the ordering information.
COIL
Approx.200mW
Approx.280mW (2)
Approx.140mW
SAFETY APPROVAL RATINGS
Single side stable
1 coil latching
2A 30VDC,at 85
Coil power
UL/CUL
TUV
1A 277VAC,at 85
10mA 1000VDC, at105
10mA 1500VDC, at105
Approx.200mW (2)
AgNi+Au plated
≤90K(2A Resistive load 85oC environment)
Temperature rise
Notes: 1) The data shown above are initial values.
(2) Product with 907 suffix, meet ITU-T K.21 requirement on surge
voltage。
Notes: Only typical loads are listed above. Other load specifications
can be available upon request.
HONGFA RELAY
2020 Rev. 1.01
ISO9001、ISO/TS16949、ISO14001、OHSAS18001、IECQ QC 080000 CERTIFIED
58