HFBR-5803/-5803T FDDI, 100 Mb/s
ATM, and Fast Ethernet Transceivers
in Low Cost 1 x 9 Package Style
Data Sheet
Features
•
Full compliance with the optical
performance requirements of the
FDDI PMD standard
•
•
Full compliance with the FDDI
LCF-PMD standard
Full compliance with the optical
performance requirements of the
ATM 100 Mb/s physical layer
Full compliance with the optical
performance requirements of
100 Base-FX version of IEEE 802.3u
Multisourced 1 x 9 package style
with choice of duplex SC or
duplex ST* receptacle
Description
The HFBR-5800 family of trans-
ceivers from Agilent provide the
system designer with products to
implement a range of Fast
Ethernet, FDDI and ATM
(Asynchronous Transfer Mode)
designs at the 100 Mb/s-125 MBd
rate.
The HFBR-5803/-5803T is useful
for both ATM 100 Mb/s interfaces
and Fast Ethernet 100 Base-FX
interfaces. The ATM Forum User-
Network Interface (UNI) Standard,
Version 3.0, defines the Physical
Layer for 100 Mb/s Multimode
Fiber Interface for ATM in Section
2.3 to be the FDDI PMD Standard.
Likewise, the Fast Ethernet
Alliance defines the Physical
Layer for 100 Base-FX for Fast
Ethernet to be the FDDI PMD
Standard.
•
•
•
•
•
Wave solder and aqueous wash
process compatible
Manufactured in an ISO 9002
certified facility
Single +3.3 V or +5 V power
supply
The transceivers are all supplied
in the industry standard 1 x 9 SIP
package style with either a duplex
SC or a duplex ST* connector
interface.
Applications
FDDI PMD, ATM and Fast Ethernet
2 km Backbone Links
ATM applications for physical
layers other than 100 Mb/s
Multimode Fiber Interface are
supported by Agilent. Products
are available for both the single
mode and the multimode fiber
SONET OC-3c (STS-3c) ATM
interfaces and the 155 Mb/s-194
MBd multimode fiber ATM
interface as specified in the ATM
Forum UNI.
•
•
Multimode fiber backbone links
Multimode fiber wiring closet to
desktop links
The HFBR-5803/-5803T are
1300 nm products with optical
performance compliant with the
FDDI PMD standard. The FDDI
PMD standard is ISO/IEC 9314-3:
1990 and ANSI X3.166 - 1990.
•
•
Very low cost multimode fiber
links from wiring closet to
desktop
Multimode fiber media converters
*ST is a registered trademark of AT&T
Lightguide Cable Connectors.
These transceivers for 2 km
multimode fiber backbones are
supplied in the small 1 x 9 duplex
SC or ST package style.
Note: The “T” in the product numbers
indicates a transceiver with a duplex ST
connector receptacle.
Product numbers without a “T” indicate
transceivers with a duplex SC connector
receptacle.
Contact your Agilent sales
representative for information on
these alternative Fast Ethernet,
FDDI and ATM products.