HFBR-5803/5803T/5803A/5803AT
FDDI, 100 Mb/s ATM, and Fast Ethernet
Transceivers in Low Cost 1 x 9 Package
Style
Data Sheet
Features
•
Full compliance with the optical
performance requirements of the
FDDI PMD standard
•
•
Full compliance with the FDDI
LCF-PMD standard
Description
The HFBR-5800 family of trans-
ceivers from Agilent provide the
system designer with products
to implement a range of Fast
Ethernet, FDDI and ATM
(Asynchronous Transfer Mode)
designs at the 100 Mb/s-125
MBd rate.
Likewise, the Fast Ethernet
Alliance defines the Physical
Layer for 100 Base-FX for Fast
Ethernet to be the FDDI PMD
Standard.
Full compliance with the optical
performance requirements of the
ATM 100 Mb/s physical layer
Full compliance with the optical
performance requirements of
100 Base-FX version of IEEE 802.3u
Multisourced 1 x 9 package style
with choice of duplex SC or
duplex ST* receptacle
Wave solder and aqueous wash
process compatible
Manufactured in an ISO 9002
certified facility
•
•
ATM applications for physical
layers other than 100 Mb/s
The transceivers are all supplied Multimode Fiber Interface are
in the industry standard 1 x 9
SIP package style with either a
duplex SC or a duplex ST*
connector interface.
supported by Agilent. Products
are available for both the single
mode and the multimode fiber
SONET OC-3c (STS-3c) ATM
interfaces and the 155 Mb/s-194
MBd multimode fiber ATM
interface as specified in the ATM
Forum UNI.
•
•
•
FDDI PMD, ATM and Fast Ethernet
2 km Backbone Links
Single +3.3 V or +5 V power
supply
The HFBR-5803/5803T are
1300 nm products with optical
performance compliant with the
FDDI PMD standard. The FDDI
PMD standard is ISO/IEC
9314-3:
Applications
•
•
Multimode fiber backbone links
Multimode fiber wiring closet to
desktop links
Very low cost multimode fiber
links from wiring closet to
desktop
Contact your Agilent sales
representative for information
on these alternative Fast
Ethernet, FDDI and ATM
products.
•
•
1990 and ANSI X3.166 - 1990.
These transceivers for 2 km
multimode fiber backbones are
supplied in the small 1 x 9
Ordering Information
Multimode fiber media converters
The HFBR-5803/5803T/5803A/
5803AT 1300 nm products are
available for production orders
through the Agilent Component
Field Sales Offices and
*ST is a registered trademark of AT&T
Lightguide Cable Connectors.
duplex SC or ST package style.
The HFBR-5803/-5803T is useful
for both ATM 100 Mb/s
Note: The “T” in the product numbers
indicates a transceiver with a duplex ST
connector receptacle.
Product numbers without a “T” indicate
transceivers with a duplex SC connector
receptacle.
Authorized Distributors world
wide.
interfaces and Fast Ethernet 100
Base-FX interfaces. The ATM
Forum User-Network Interface
(UNI) Standard, Version 3.0,
defines the Physical Layer for
100 Mb/s Multimode Fiber
0 °C to +70 °C
HFBR-5803/5803T
-10 °C TO +85 °C
HFBR-5803A/5803AT
Interface for ATM in Section 2.3
to be the FDDI PMD Standard.