HFA1115
September 1998
File Number 3606.4
225MHz, Low Power, Output
Features
Limiting, Closed Loop Buffer Amplifier
• User Programmable Output Voltage Limiting
The HFA1115 is a high speed closed loop Buffer featuring both
user programmable gain and output limiting. Manufactured on
Intersil’s proprietary complementary bipolar UHF-1 process, the
HFA1115 also offers a wide -3dB bandwidth of 225MHz, very
fast slew rate, excellent gain flatness and high output current.
• High Input Impedance . . . . . . . . . . . . . . . . . . . . . . . 1MΩ
• Differential Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.02%
• Differential Phase . . . . . . . . . . . . . . . . . . . . 0.03 Degrees
• Wide -3dB Bandwidth (A = +2). . . . . . . . . . . . . .225MHz
V
This buffer is the ideal choice for high frequency applications
requiring output limiting, especially those needing ultra fast
overload recovery times. The limiting function allows the
designer to set the maximum positive and negative output
levels, thereby protecting later stages from damage or input
saturation. The HFA1115 also allows for voltage gains of +2,
+1, and -1, without the use of external resistors. Gain
selection is accomplished via connections to the inputs, as
described in the “Application Information” text. The result is a
more flexible product, fewer part types in inventory, and more
efficient use of board space.
• Very Fast Slew Rate (A = -1) . . . . . . . . . . . . . . 1135V/µs
V
• Low Supply Current . . . . . . . . . . . . . . . . . . . . . . . . 7.1mA
• High Output Current . . . . . . . . . . . . . . . . . . . . . . . . .60mA
• Excellent Gain Accuracy . . . . . . . . . . . . . . . . . . . 0.99V/V
• User Programmable For Closed-Loop Gains of +1, -1 or
+2 Without Use of External Resistors
• Fast Overdrive Recovery . . . . . . . . . . . . . . . . . . . . . <1ns
• Standard Operational Amplifier Pinout
Compatibility with existing op amp pinouts provides flexibility
to upgrade low gain amplifiers, while decreasing component
count. Unlike most buffers, the standard pinout provides an
upgrade path, should a higher closed loop gain be needed at
a future date. For Military product, refer to the HFA1115/883
data sheet.
Applications
• Flash A/D Drivers
• Video Cable Drivers
• High Resolution Monitors
• Professional Video Processing
• Medical Imaging
Pinout
HFA1115
(PDIP, SOIC)
TOP VIEW
• Video Digitizing Boards/Systems
• Battery Powered Communications
350
NC
-IN
+IN
V-
1
2
3
4
8
7
6
5
V
H
Ordering Information
350
_
+
V+
PART NUMBER
(BRAND)
TEMP.
RANGE ( C)
PKG.
NO.
o
PACKAGE
8 Ld PDIP
8 Ld SOIC
OUT
HFA1115IP
-40 to 85
E8.3
M8.15
V
L
HFA1115IB
(H1115I)
-40 to 85
Pin Descriptions
HFA11XXEVAL
High Speed Op Amp DIP Evaluation Board
NAME
PIN NUMBER
DESCRIPTION
NC
1
2
3
4
5
6
7
8
No Connection
Inverting Input
Non-Inverting Input
Negative Supply
Lower Output Limit
Output
-IN
+IN
V-
V
L
OUT
V+
Positive Supply
Upper Output Limit
V
H
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
http://www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999
1