TM
HFA1130/883
Output Clamping,
850MHz Current Feedback Amplifier
July 1994
Features
Description
• This Circuit is Processed in Accordance to MIL-STD- The HFA1130/883 is a high speed, wideband current feed-
883 and is Fully Conformant Under the Provisions of back amplifier featuring programmable output clamps. Built
Paragraph 1.2.1.
with Intersil’ proprietary complementary bipolar UHF-1 pro-
cess, it is the fastest monolithic amplifier available from any
semiconductor manufacturer.
• User Programmable Output Voltage Clamps
• Low Distortion (HD3, 30MHz) . . . . . . . . . . -84dBc (Typ)
• Wide -3dB Bandwidth . . . . . . . . . . . . . . . 850MHz (Typ)
• Very High Slew Rate . . . . . . . . . . . . . . . 2300V/µs (Typ)
• Fast Settling (0.1%) . . . . . . . . . . . . . . . . . . . . 11ns (Typ)
• Excellent Gain Flatness (to 50MHz) . . . . . 0.05dB (Typ)
• High Output Current . . . . . . . . . . . . . . . . . . 65mA (Typ)
• Fast Overdrive Recovery . . . . . . . . . . . . . . . <1ns (Typ)
This amplifier is the ideal choice for high frequency applica-
tions requiring output limiting, especially those needing ultra
fast overdrive recovery times. The output clamp function
allows the designer to set the maximum positive and nega-
tive output levels, thereby protecting later stages from dam-
age or input saturation. The sub-nanosecond overdrive
recovery time quickly returns the amplifier to linear operation
following an overdrive condition.
The HFA1130/883’s wide bandwidth, fast settling character-
istic, and low output impedance, coupled with the output
clamping ability, make this amplifier ideal for driving fast A/D
converters.
Applications
• Residue Amplifier
Component and composite video systems will also benefit
from this amplifier’s performance, as indicated by the excel-
lent gain flatness, and 0.03%/0.05 Degree Differential Gain/
• Video Switching and Routing
• Pulse and Video Amplifiers
• Wideband Amplifiers
• RF/IF Signal Processing
• Flash A/D Driver
Phase specifications (R = 75Ω).
L
Ordering Information
TEMPERATURE
PART NUMBER
HFA1130MJ/883
HFA1130ML/883
RANGE
PACKAGE
-55oC to +125oC 8 Lead CerDIP
• Medical Imaging Systems
-55oC to +125oC 20 Lead Ceramic LCC
Pinouts
HFA1130/883
(CERDIP)
HFA1130/883
(CLCC)
TOP VIEW
TOP VIEW
NC
-IN
+IN
V-
1
2
3
4
8
7
6
5
VH
3
2
1
20 19
V+
-
VH
V+
NC
-IN
4
18
17
+
OUT
VL
5
6
7
8
-
16 NC
NC
+IN
NC
+
OUT
15
14 NC
9
10 11 12 13
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a trademark of Intersil Americas Inc.
Spec Number 511082-883
Copyright © Intersil Americas Inc. 2002. All Rights Reserved
204
FN3625.1