HFA1135
®
Data Sheet
January 23, 2006
FN3653.6
360MHz, Low Power, Video Operational
Amplifier with Output Limiting
Features
• User Programmable Output Voltage Limiting
The HFA1135 is a high speed, low power current feedback
amplifier build with Intersil’s proprietary complementary
bipolar UHF-1 process. This amplifier features user
• Fast Overdrive Recovery . . . . . . . . . . . . . . . . . . . . . . <1ns
• Low Supply Current . . . . . . . . . . . . . . . . . . . . . . . . 6.8mA
• High Input Impedance . . . . . . . . . . . . . . . . . . . . . . . 2MΩ
• Wide -3dB Bandwidth. . . . . . . . . . . . . . . . . . . . . . 360MHz
• Very Fast Slew Rate. . . . . . . . . . . . . . . . . . . . . . 1200V/µs
• Gain Flatness (to 50MHz) . . . . . . . . . . . . . . . . . . ±0.07dB
• Differential Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.02%
• Differential Phase. . . . . . . . . . . . . . . . . . . . . 0.04 Degrees
• Pin Compatible Upgrade to CLC501 and CLC502
programmable output limiting, via the V and V pins.
H
L
The HFA1135 is the ideal choice for high speed, low power
applications requiring output limiting (e.g. flash A/D drivers),
especially those requiring fast overdrive recovery times. The
limiting function allows the designer to set the maximum and
minimum output levels to protect downstream stages from
damage or input saturation. The sub-nanosecond overdrive
recovery time ensures a quick return to linear operation
following an overdrive condition.
Component and composite video systems also benefit from
this operational amplifier’s performance, as indicated by the
gain flatness, and differential gain and phase specifications.
• Pb-Free Plus Anneal Available (RoHS Compliant)
Applications
The HFA1135 is a low power, high performance upgrade for
the CLC501 and CLC502.
• Flash A/D Drivers
• High Resolution Monitors
• Professional Video Processing
• Video Digitizing Boards/Systems
• Multimedia Systems
Ordering Information
TEMP.
PKG.
DWG.
#
PART
PART
RANGE
o
NUMBER
MARKING
( C)
PACKAGE
• RGB Preamps
HFA1135IB
1135IB
-40 to 85 8 Ld SOIC
-40 to 85 8 Ld SOIC
M8.15
M8.15
• Medical Imaging
HFA1135IB96 1135IB
Tape and Reel
• Hand Held and Miniaturized RF Equipment
• Battery Powered Communications
HFA1135IBZ
(See Note)
1135IBZ
-40 to 85 8 Ld SOIC
(Pb-free)
M8.15
M8.15
HFA1135IBZ96 1135IBZ
(See Note)
-40 to 85 8 Ld SOIC
Pinout
Tape and Reel
(Pb-free)
HFA1135
(SOIC)
HFA11XXEVAL
DIP Evaluation Board for High Speed
Op Amps
TOP VIEW
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
NC
-IN
+IN
V-
1
2
3
4
8
7
6
5
V
H
V+
-
+
OUT
V
L
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2000, 2006. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.