Encoder Line Drivers
Technical Data
HEDL-550x/554x
HEDL-560x/564x
HEDL-9000/9100
HEDL-9040/9140
Features
• Available on Both Encoder
Modules (HEDS-9000
Series) and Encoder Kit
Housing (HEDS-5500 Series)
• Complementary Outputs
• Industry Standard Line
Driver IC
• Single 5 V Supply
The 70°C version utilizes an
industry standard line driver IC
(26LS31) which provides comple-
mentary outputs for each encoder
channel. The 100°C version utilizes
an industry standard line driver IC,
26C31, which provides comple-
mentary outputs for each encoder
channel. Thus, the output of the
line driver encoder is A, A, B, B
and I/I for three channel versions.
Suggested line receivers are
• Onboard Bypass Capacitor
• 70°C and 100°C Versions
Note: Agilent Technologies
encoders are not recommended
for use in safety critical
applications. Eg. ABS braking
systems, power steering, life
support systems and critical care
medical equipment. Please
contact sales representative if
more clarification is needed.
Available
26LS32 and 26LS33.
Description
For additional information,
please refer to:
HEDS-5500/5540/5600/5640
data sheet,
HEDS-90x0/91x0/92x0 data
sheets,
HEDS-9000 series extended
resolution data sheet, and
26LS31 data sheet.
Line Drivers are available for the
HEDS-55xx/56xx series and the
HEDS-9000/9100/9200/9040/
9140 series encoders. The line
driver offers enhanced perform-
ance when the encoder is used in
noisy environments, or when it is
required to drive long distances.
Device Characteristics
Parameter
Characteristic
Notes
Termination
10 conductor ribbon cable with
10 position IDC Berg connector
See pinout
Electrical Outputs
Line Driver Components
Complementary outputs: A, A, B, B, I, I
I and I available only on
three channel encoders
26LS31 line driver IC, decoupling
capacitor on PC board.
Operating Temperature
Range
0°C to 70°C
70°C Series
100°C Series
70°C Series
100°C Series
0°C to 100°C
-40°C to 70°C
-40°C to 100°C
Storage Temperature
ESD WARNING: NORMAL HANDLING PRECAUTIONS SHOULD BE TAKEN TO AVOID
STATIC DISCHARGE.