HCPL-M454
Ultra High CMR, Small Outline, 5 Lead, High Speed Optocoupler
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Features
Description
• Function compatible with HCPL-4504
The HCPL-M454 is similar to Avago’s other high speed
transistor output optocouplers, but with shorter propa-
gation delays and higher CTR. The HCPL-M454 also has
a guaranteed propagation delay difference (tPLH - tPHL).
These features make the HCPL-M454 an excellent solu-
tion to IPM inverter dead time and other switching prob-
lems.
• Surface mountable
• Very small, low profile JEDEC registered package
outline
• Compatible with infrared vapor phase reflow and
wave soldering processes
• Short propagation delays for TTL and IPM
The HCPL-M454 CTR, propagation delays, and CMR are
specified both for TTL load and drive conditions and for
IPM (Intelligent Power Module) load and drive condi-
tions. Specifications and typical performance plots for
both TTL and IPM conditions are provided for ease of ap-
plication.
applications
• Very high common mode transient immunity:
Guaranteed 15 kV/µs at VCM = 1500 V
• High CTR: >25% at 25°C
• Guaranteed specifications for common IPM
This diode-transistor optocoupler uses an insulating lay-
er between the light emitting diode and an integrated
photon detector to provide electrical insulation between
input and output. Separate connections for the photo-
diode bias and output transistor collector increase the
speed up to a hundred times over that of a conventional
applications
• TTL compatible
• Guaranteed ac and dc performance over
temperature: 0°C to 70°C
• Open collector output
• Safety approval:
Applications
UL Recognized 3750 Vac / 1 min. per UL 1577
IEC/EN/DIN EN 60747-5-2
• Inverter Circuits and Intelligent Power Module
(IPM) Interfacing: Shorter propagation delays and
guaranteed (tPLH - tPHL) specifications. (See power
inverter dead time section)
Approved VIORM = 560 Vpeak for Option 060.
CSA Approved
• High speed logic ground isolation: TTL/TTL, TTL/LTTL,
• Lead free option “-000E”
TTL/CMOS, TTL/LSTTL
• Line Receivers: High common mode transient
immunity (>15 kV/µs for a TTL load/drive) and low
input-output capacitance (0.6 pF)
• Replace pulse transformers: ave board space and
weight
• Analog signal ground isolation: Integrated
photon detector provides improved linearity over
phototransistors
CAUTION: The small junction sizes inherent to the design of this bipolar component increase the component's susceptibility to
damage from electrostatic discharge (ESD). It is advised that normal static precautions be taken in handling and assembly of this
component to prevent damage and/or degradation which may be induced by ESD.