ꢀꢀ
ꢀꢀ
(888) IPD-CONVerters
ꢀ
(888) 473-2668
ꢀ
www.ipdconverters.com
HAS SERIES - 60 WATT
DESCRIPTION
FEATURES
HAS DC/DC converters are low-cost, industry
standard, half-brick converters. The HAS features 2:1
input voltage, excellent efficiency, and open-frame
packaging technology. Operation is guaranteed from
-40°C to 100°C, and a built-in input pi filter ensures
low noise operation. Available in several input and
output combinations, the HAS is designed for
industrial, telecom, and networking applications.
• Industry Standard Half-
Brick
• Low-Cost Design
• Open-Frame Packaging
• 100°C Baseplate
Operation
• 24V and 48V Inputs
• Optional Enable Logic
• 1500V Isolation
• Input Pi Filter
Efficiency vs. Load (24V Input)
90
85
80
75
70
65
60
HAS060YH-A
EFF. (18v)
EFF. (24v)
EFF. (36v)
TECHNICAL SPECIFICATIONS
Input
Voltage Range
24 VDC Nominal
48 VDC Nominal
18 - 36 VDC
36 - 72 VDC
25 mA
10 20 30 40 50 60 70 80 90 100
Reflected Ripple
Input Reverse Voltage Protection
Shunt Diode
LOAD %
Output
Setpoint Accuracy
±1%
±0.2% Vout
±0.2% Vout
0.5 VDC
Efficiency vs. Load (48V Input)
Line Regulation Vin Min. - Vin Max., Iout Rated
Load Regulation Iout Min. - Iout Max., Vin Nom.
Remote Sense Headroom
90
85
80
75
70
65
60
55
50
45
Minimum Output Current
10 % Iout Rated
25% Iout
Dynamic Regulation, Loadstep
Pk Deviation
Settling Time
Voltage Trim Range
Short Circuit / Overcurrent Protection
Current Limit Threshold Range, % of Iout Rated
OVP Trip Range
4% Vout
500 µs
±10%
HAS060ZH-A
EFF. (36v)
EFF. (48v)
EFF. (72v)
Hiccup
110 - 140%
115 - 140% Vout Nom.
Vin Negative
Remote Shutdown Reference
Shutdown Pin Current, Sourced at Off
10 mA Max.
10
20
30
40
50
60
70
80
90 100
LOAD %
General
Turn-On Time
10 ms
Positive or Negative Logic
500 kHz
Remote Shutdown
Switching Frequency
Isolation
Notes
MTBF predictions may vary slightly from model to model.
Input - Output
1500 VDC
1050 VDC
500 VDC
0.03%/°C
†
Input - Case
Output - Case
Specifications typically at 25°C, normal line, and full load, unless otherwise
stated.
Temperature Coefficient
Case Temperature
Operating Range
-40 To +100°C
-40 To +125°C
105 To 115°C
95%
5 g, 10 - 55 Hz
2.5 x 106 hrs
UL, CUL, TUV
1.4 oz
Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with
commercial wave-soldering equipment.
Storage Range
Thermal Shutdown Range
Humidity Max., Non-Condensing
Vibration, 3 Axes, 5 Min Each
MTBF† (Bellcore TR-NWT-000332)
Safety
Safety: Agency approvals may vary from model to model. Please consult factory
for specific model information.
Units are water-washable and fully compatible with commercial spray or
immersion post wave-solder washing equipment.
Weight (approx.)
1