ꢀꢀ
ꢀꢀ
(888) IPD-CONVerters
ꢀ
(888) 473-2668
ꢀ
www.ipdconverters.com
HAD SERIES - DUAL OUTPUT, 30 WATT
DESCRIPTION
FEATURES
HAD dual output DC/DC converters feature high
efficiency, open-frame packaging, and 1500 VDC
isolation. The HAD family allows board designers
to deliver any combination of power from
either output, up to each model’s maximum rating.
The HAD uses planar magnetics and has an MTBF of
over a million hours.
• Independent Dual 5V and • Trim And Enable Pins
3.3V Outputs
• Flexible Load Sharing
• Fixed Frequency
• 1500V Isolation
• High Efficiency Topology • Planar Magnetics
• Open-Frame Design
TECHNICAL SPECIFICATIONS
Input
Voltage Range
24 VDC / 48 VDC Nominal
Reflected Ripple
Input Reverse Voltage Protection
Input Transient Withstand
UVLO 24V Input / 48V Input
Inrush Current Limit
18 - 36 / 34 - 75 VDC
60 mA
Shunt Diode
100 V/100 ms
17V on, 15V off / 33V on, 30V off
1A2/S
Efficiency vs. Load (48V Input)
Output
Setpoint Accuracy
±1%
1.0% Vout
80
75
70
65
Line Regulation Vin Min. - Vin Max., Iout Rated
Load Regulation Iout Min. - Iout Max., Vin Nom.
Minimum Output Current, 5V/3.3V
1.0% Vout
300 mA/500 mA
25% Iout
Dynamic Regulation, Loadstep
Pk Deviation
Settling Time
Voltage Trim Range
4% Vout
60
HAD030ZGE-A
500
µs
55
±10%
50
45
40
Power Limit Threshold Range, % of Iout Rated
110 - 140%
OVP Trip Range
OVP Type
115 - 140% Vout Nom.
Hiccup
Overcurrent Protection Type
Continuous
10
20
30
40
50
60
70
80
90
100
LOAD %
General
Turn-On Time
10 ms
Positive Logic
500 kHz
Remote Shutdown1
Switching Frequency
Isolation
Notes
For negative logic, add suffix “N” to model number.
1
†
Input - Output
Input - Case
Output - Case
Temperature Coefficient
Case Temperature
Operating Range
1500 VDC
1050 VDC
500 VDC
0.03%/°C
MTBF predictions may vary slightly from model to model.
Specifications typically at 25°C, normal line, and full load, unless otherwise
stated.
-40 To +100°C
-40 To +125°C
105 To 115°C
95%
Storage Range
Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with
commercial wave-soldering equipment.
Thermal Shutdown Range
Humidity Max., Non-Condensing
Vibration, 3 Axes, 5 Min Each
MTBF† (Bellcore TR-NWT-000332)
Safety
Safety: Agency approvals may vary from model to model. Please consult factory
for specific model information.
5 g
1.3 x 106 hrs
Consult Factory
2.4 oz
Units are water-washable and fully compatible with commercial spray or
immersion post wave-solder washing equipment.
Weight (approx.)
C-76