HA-2520, HA-2522, HA-2525
®
Data Sheet
November 15, 2006
FN2894.8
20MHz, High Slew Rate, Uncompensated,
High Input Impedance, Operational
Amplifiers
Features
• High Slew Rate . . . . . . . . . . . . . . . . . . . . . . . . . . 120V/μs
• Fast Settling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200ns
• Full Power Bandwidth . . . . . . . . . . . . . . . . . . . . . . . 2MHz
HA-2520, HA-2522, HA-2525 comprise a series of operational
amplifiers delivering an unsurpassed combination of
specifications for slew rate, bandwidth and settling time. These
dielectrically isolated amplifiers are controlled at close loop
gains greater than 3 without external compensation. In addition,
these high performance components also provide low offset
current and high input impedance.
• Gain Bandwidth (A ≥ 3) . . . . . . . . . . . . . . . . . . . . 20MHz
V
• High Input Impedance . . . . . . . . . . . . . . . . . . . . . . 100MΩ
• Low Offset Current. . . . . . . . . . . . . . . . . . . . . . . . . . .10nA
• Compensation Pin for Unity Gain Capability
120V/ms slew rate and 200ns (0.2%) settling time of these
amplifiers make them ideal components for pulse amplification
and data acquisition designs. These devices are valuable
components for RF and video circuitry requiring up to 20MHz
gain bandwidth and 2MHz power bandwidth. For accurate signal
conditioning designs the HA-2520, HA-2522, HA-2525’s
superior dynamic specifications are complemented by 10nA
offset current, 100MΩ input impedance and offset trim capability.
• Pb-Free Plus Anneal Available (RoHS Compliant)
Applications
• Data Acquisition Systems
• RF Amplifiers
• Video Amplifiers
• Signal Generators
Ordering Information
Pinouts
TEMP.
RANGE
(°C)
PKG.
DWG.
#
HA-2520, HA-2525
(8 LD CERDIP, 8 LD PDIP, CERDIP, SOIC)
TOP VIEW
PART
PART
NUMBER
MARKING
PACKAGE
HA2-2520-2
HA7-2520-2
HA2-2522-2
HA2-2525-5
HA3-2525-5
HA2-2520-2
HA7-2520-2
HA2-2522-2
HA2-2525-5
HA3-2525-5
-55 to +125 8 Ld Metal Can
-55 to +125 8 Ld CerDIP
-55 to +125 8 Ld Metal Can
T8.C
F8.3A
T8.C
T8.C
E8.3
E8.3
BAL
-IN
1
2
3
4
8
7
6
5
COMP
V+
-
+
+IN
V-
OUT
BAL
0 to +75
0 to +75
0 to +75
8 Ld Metal Can
8 Ld PDIP
HA3-2525-5Z HA3-2525-5Z
(Note)
8 Ld PDIP*
(Pb-free)
HA7-2525-5
HA9P2525-5
HA7-2525-5
25255
0 to +75
0 to +75
0 to +75
8 Ld CerDIP
8 Ld SOIC
F8.3A
M8.15
M8.15
HA-2520, HA-2522, HA-2525
(8 LD METAL CAN)
TOP VIEW
HA9P2525-5Z 2525-5Z
(Note)
8 Ld SOIC
(Pb-free)
COMP
8
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100% matte tin
plate termination finish, which are RoHS compliant and compatible with
both SnPb and Pb-free soldering operations. Intersil Pb-free products are
MSL classified at Pb-free peak reflow temperatures that meet or exceed the
Pb-free requirements of IPC/JEDEC J STD-020.
BAL
1
3
7
5
V+
-
+
2
6
OUT
IN-
BAL
IN+
*Pb-free PDIPs can be used for through hole wave solder processing only.
They are not intended for use in Reflow solder processing applications.
4
V-
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 1999, 2004, 2005, 2006. All Rights Reserved
1
All other trademarks mentioned are the property of their respective owners.