HT46R4A
Cost-Effective A/D Type 8-Bit MCU
Technical Document
·
·
·
Tools Information
FAQs
Application Note
-
-
-
-
-
-
HA0003E Communicating between the HT48 & HT46 Series MCUs and the HT93LC46 EEPROM
HA0049E Read and Write Control of the HT1380
HA0051E Li Battery Charger Demo Board - Using the HT46R47
HA0052E Microcontroller Application - Battery Charger
HA0083E Li Battery Charger Demo Board - Using the HT46R46
HA0075E MCU Reset and Oscillator Circuits Application Note
Features
·
·
Operating voltage:
Up to 0.5ms instruction cycle with 8MHz system clock
at VDD=5V
f
f
SYS=4MHz: 2.2V~5.5V
SYS=8MHz: 3.3V~5.5V
·
·
·
·
·
·
·
6-level subroutine nesting
·
·
·
Max of 27 bidirectional I/O lines
6 channel 9-bit resolution A/D converter
Dual channel 8-bit PWM output shared with I/O lines
Bit manipulation instruction
External interrupt input shared with I/O line
Two 8-bit programmable Timer/Event Counters with
overflow interrupt
Table read instructions
·
·
·
·
·
·
Integrated crystal and RC oscillator
Watchdog Timer
63 powerful instructions
All instructions executed in one or two machine
cycles
4096´15 program memory
192´8 data memory
·
·
Low voltage reset function
PFD for audio frequency generation
28-pin SKDIP/SOP, 32-pin DIP, 44-QFP package
Power down and wake-up functions to reduce power
consumption
General Description
The HT46R4A is a device from the Cost-Effective A/D
Type Series of MCUs. As an 8-bit high performance
RISC architecture microcontroller, the device is de-
signed especially for applications that interface directly
to analog signals, such as those from sensors. The de-
vices include an integrated multi-channel Analog to Dig-
ital Converter in addition to two Pulse Width Modulation
outputs.
The benefits of integrated A/D and PWM functions, in
addition to low power consumption, high performance,
I/O flexibility and low-cost, provides the device with the
versatility to suit a wide range of application possibilities
such as sensor signal processing, motor driving, indus-
trial control, consumer products, subsystem controllers,
etc.
As is the case with all Holtek microcontroller devices,
the HT46R4A is fully supported by a full suite of
profesional hardware and software tools, containing
comprehensive features to ensure user applications are
designed and debugged in as short a time as possible.
The usual Holtek MCU features such as power down
and wake-up functions, oscillator options, programma-
ble frequency divider, etc. combine to ensure user appli-
cations require a minimum of external components.
Rev. 1.00
1
November 28, 2007