HMec3hatAronMic Analog Timer
Please read and understand this catalog before purchasing the
products. Please consult your OMRON representative if you have any
questions or comments. Refer to Safety Precautions on page 7.
Large Setting Dial and Moving Pointers Ideal
for Easy Operation and Monitoring
• Incorporating an easy-to-see large setting dial with moving
pointers.
• Wide time-setting range of 0.2 s to 60 h (available through three
time-range model types)
• Wide AC power supply range (100 to 240 VAC)
• IP65 watertight and dust-tight front panel.
• Approved by UL and CSA.
• Conforms to EN61812-1 and IEC60664-1
4 kV for Low Voltage, and EMC Directives.
• Conforms to EMC standards.
• Six-language instruction manual provided.
• Programmable contact enables the building of a self-holding
relay circuit as well as built-in instantaneous contact. (-NS)
• Memory retention (-NSR)
• Finger protection terminal block
• Enables easy sequence checks through instantaneous outputs
for a zero set value at any time range.
Model Number Legend
H3AM - NS
-
-
1
2
3
2. Time Range
3. Accessory
1. Resetting System
None: Self-resetting
R: Electric resetting
A:
B:
C:
0.5 s to 30 h
1 s to 60 h
0.2 s to 12 h
None: Without accessory
300: Waterproof Packing
(Y92S-35) provided
Ordering Information
■ List of Models
Rated supply
Resetting
Control output
Time range
voltage
system
0.5 s to 30 h (30 s, 3 min, 1 s to 60 h (60 s, 6 min, 0.2 s to 12 h (12 s, 120 s,
(See note.)
30 min, 3 h, 30 h)
H3AM-NS-A
60 min, 6 h, 60 h)
H3AM-NS-B
12 min, 120 min, 12 h)
100 to 240
VAC
Self-resetting
DPDT contact output
H3AM-NS-C
(Time-limit output SPDT and
switchable SPDT
(time-limit ↔ instantaneous))
Electric
resetting
DPDT contact output
(Time-limit output SPDT and
instantaneous output SPDT)
H3AM-NSR-A
H3AM-NSR-B
H3AM-NSR-C
Note: The operation of the instantaneous contacts differs for the self-resetting and electric resetting systems. Refer to Timing Charts on page 5
for details.
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
http://www.ia.omron.com/
1