®
HFA1114
850MHz Video Cable Driving Buffer
September 2004
Features
Des cription
• Access to Summing Node Allows Circuit Customization
The HFA1114 is a closed loop Buffer featuring user
programmable gain and ultra high speed performance.
Manufactured on Intersil’ proprietary complementary bipolar
UHF-1 process, the HFA1114 offers a wide -3dB bandwidth
of 850MHz, very fast slew rate, excellent gain flatness, low
distortion and high output current.
• User Programmable For Closed-Loop Gains of +1, -1
or +2 Without Use of External Resistors
• Wide -3dB Bandwidth . . . . . . . . . . . . . . . . . . . . 850MHz
• Very Fast Slew Rate . . . . . . . . . . . . . . . . . . . . 2400V/µs
• Fast Settling Time (0.1%) . . . . . . . . . . . . . . . . . . . 11ns
• High Output Current . . . . . . . . . . . . . . . . . . . . . . . 60mA
• Excellent Gain Accuracy. . . . . . . . . . . . . . . . . . 0.99V/V
• Overdrive Recovery. . . . . . . . . . . . . . . . . . . . . . . <10ns
• Standard Operational Amplifier Pinout
A unique feature of the pinout allows the user to select a
voltage gain of +1, -1, or +2, without the use of any external
components. Gain selection is accomplished via connections
to the inputs, as described in the “Application Information”
section. The result is a more flexible product, fewer part types
in inventory, and more efficient use of board space.
Compatibility with existing op amp pinouts provides flexibility
to upgrade low gain amplifiers, while decreasing component
count. Unlike most buffers, the standard pinout provides an
upgrade path should a higher closed loop gain be needed at
a future date.
Applications
• RF/IF Processors
For applications requiring a standard buffer pinout, please
refer to the HFA1110 datasheet.
• Driving Flash A/D Converters
• High Speed Communications
• Impedance Transformation
• Line Driving
Part # Information
PART NUMBER
(BRAND)
TEMP. RANGE
PKG.
NO.
o
( C)
PACKAGE
• Video Switching and Routing
• Radar Systems
HFA1114IB
(H1114I)
-40 to 85
8 Ld SOIC
M8.15
• Medical Imaging Systems
HFA11XXEVAL
DIP Evaluation Board for High Speed
Op Amps
Pinout
Pin Des criptions
HFA1114 (SOIC)
PIN
NUMBER
TOP VIEW
NAME
NC
DESCRIPTION
No Connection
1, 8
2
300
NC
-IN
+IN
V-
1
2
3
4
8
7
6
5
NC
V+
-IN
Inverting Input
Non-Inverting Input
Negative Supply
Summing Node
Output
300
+IN
V-
3
-
+
4
OUT
SN
SN
5
OUT
V+
6
7
Positive Supply
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a trademark of Intersil Americas Inc.
FN3151.5
Copyright © Intersil Americas Inc. 2002., 2004All Rights Reserved
1