5秒后页面跳转
GS84032T-150I PDF预览

GS84032T-150I

更新时间: 2024-11-27 04:56:19
品牌 Logo 应用领域
GSI 存储内存集成电路静态存储器时钟
页数 文件大小 规格书
31页 629K
描述
256K x 18, 128K x 32, 128K x 36 4Mb Sync Burst SRAMs

GS84032T-150I 技术参数

是否Rohs认证: 不符合生命周期:Obsolete
零件包装代码:QFP包装说明:LQFP, QFP100,.63X.87
针数:100Reach Compliance Code:unknown
ECCN代码:3A991.B.2.BHTS代码:8542.32.00.41
风险等级:5.72Is Samacsys:N
最长访问时间:10 ns其他特性:FLOW-THROUGH OR PIPELINED ARCHITECTURE
最大时钟频率 (fCLK):150 MHzI/O 类型:COMMON
JESD-30 代码:R-PQFP-G100JESD-609代码:e0
长度:20 mm内存密度:4194304 bit
内存集成电路类型:CACHE SRAM内存宽度:32
湿度敏感等级:3功能数量:1
端子数量:100字数:131072 words
字数代码:128000工作模式:SYNCHRONOUS
最高工作温度:85 °C最低工作温度:-40 °C
组织:128KX32输出特性:3-STATE
封装主体材料:PLASTIC/EPOXY封装代码:LQFP
封装等效代码:QFP100,.63X.87封装形状:RECTANGULAR
封装形式:FLATPACK, LOW PROFILE并行/串行:PARALLEL
峰值回流温度(摄氏度):NOT SPECIFIED电源:2.5/3.3,3.3 V
认证状态:Not Qualified座面最大高度:1.6 mm
最大待机电流:0.04 A最小待机电流:3.14 V
子类别:SRAMs最大压摆率:0.285 mA
最大供电电压 (Vsup):3.6 V最小供电电压 (Vsup):3.135 V
标称供电电压 (Vsup):3.3 V表面贴装:YES
技术:CMOS温度等级:INDUSTRIAL
端子面层:Tin/Lead (Sn/Pb)端子形式:GULL WING
端子节距:0.65 mm端子位置:QUAD
处于峰值回流温度下的最长时间:NOT SPECIFIED宽度:14 mm
Base Number Matches:1

GS84032T-150I 数据手册

 浏览型号GS84032T-150I的Datasheet PDF文件第2页浏览型号GS84032T-150I的Datasheet PDF文件第3页浏览型号GS84032T-150I的Datasheet PDF文件第4页浏览型号GS84032T-150I的Datasheet PDF文件第5页浏览型号GS84032T-150I的Datasheet PDF文件第6页浏览型号GS84032T-150I的Datasheet PDF文件第7页 
GS84018/32/36T/B-180/166/150/100  
180Mhz - 100Mhz  
TQFP, BGA  
Commercial Temp  
Industrial Temp  
256K x 18, 128K x 32, 128K x 36  
3.3V VDD  
4Mb Sync Burst SRAMs  
3.3V & 2.5V I/O  
be used. New addresses can be loaded on every cycle with no  
degradation of chip performance.  
Features  
• FT pin for user configurable flow through or pipelined operation.  
• Single Cycle Deselect (SCD) Operation.  
Flow Through / Pipeline Reads  
The function of the Data Output register can be controlled by the user  
via the FT mode pin/bump (pin 14 in the TQFP and bump 5R in the  
BGA, ) . Holding the FT mode pin/bump low places the RAM in Flow  
through mode, causing output data to bypass the Data Output  
Register. Holding FT high places the RAM in Pipelined Mode,  
activating the rising edge triggered Data Output Register.  
• 3.3V +10%/-5% Core power supply  
• 2.5V or 3.3V I/O supply.  
• LBO pin for linear or interleaved burst mode.  
• Internal input resistors on mode pins allow floating mode pins.  
• Default to Interleaved Pipelined Mode.  
• Byte write (BW) and/or global write (GW) operation.  
• Common data inputs and data outputs.  
• Clock Control, registered, address, data, and control.  
• Internal Self-Timed Write cycle.  
• Automatic power-down for portable applications.  
• JEDEC standard 100-lead TQFP or 119 Bump BGA package.  
SCD Pipelined Reads  
The GS84018/32/36 is an SCD (Single Cycle Deselect) pipelined  
synchronous SRAM. DCD (Dual Cycle Deselect) versions are also  
available.SCD SRAMs pipeline deselect commands one stage less  
than read commands. SCD RAMs begin turning off their outputs  
immediately after the deselect command has been captured in the  
input registers.  
-180  
-166  
-150  
-100  
tCycle 5.5ns  
6.0ns  
3.5ns  
6.6ns  
3.8ns  
10ns  
4.5ns  
Byte Write and Global Write  
Pipeline  
3-1-1-1  
tKQ  
IDD  
3.2ns  
Byte write operation is performed by using byte write enable (BW)  
input combined with one or more individual byte write signals (Bx). In  
addition, Global Write (GW) is available for writing all bytes at one  
time, regardless of the Byte Write control inputs.  
330mA 310mA 275mA 190mA  
tKQ  
tCycle  
IDD  
8ns  
10ns  
8.5ns  
10ns  
10ns  
10ns  
12ns  
15ns  
Flow Through  
2-1-1-1  
190mA 190mA 190mA 140mA  
Sleep Mode  
Low power (Sleep mode) is attained through the assertion (High) of  
the ZZ signal, or by stopping the clock (CK). Memory data is retained  
during Sleep mode.  
Functional Description  
Core and Interface Voltages  
Applications  
The GS84018/32/36 operates on a 3.3V power supply and all inputs/  
outputs are 3.3V and 2.5V compatible. Separate output power (VDDQ)  
pins are used to de-couple output noise from the internal circuit.  
The GS84018/32/36 is a 4,718,592 bit (4,194,304 bit for x32 version)  
high performance synchronous SRAM with a 2 bit burst address  
counter. Although of a type originally developed for Level 2 Cache  
applications supporting high performance CPU’s, the device now  
finds application in synchronous SRAM applications ranging from  
DSP main store to networking chip set support. The GS84018/32/36  
is available in a JEDEC standard 100-lead TQFP or 119 Bump BGA  
package.  
Controls  
Addresses, data I/O’s, chip enables (E1, E2, E3), address burst control  
inputs (ADSP, ADSC, ADV) and write control inputs (Bx, BW, GW) are  
synchronous and are controlled by a positive edge triggered clock  
input (CK). Output enable (G) and power down control (ZZ) are  
asynchronous inputs. Burst cycles can be initiated with either ADSP  
or ADSC inputs. In Burst mode, subsequent burst addresses are  
generated internally and are controlled by ADV. The burst address  
counter may be configured to count in either linear or interleave order  
with the Linear Burst Order (LBO) input. The Burst function need not  
Rev: 2.05 6/2000  
1/31  
© 1999, Giga Semiconductor, Inc.  
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.  

与GS84032T-150I相关器件

型号 品牌 获取价格 描述 数据表
GS84032T-150IT ETC

获取价格

x32 Fast Synchronous SRAM
GS84032T-150T GSI

获取价格

Cache SRAM, 128KX32, 10ns, CMOS, PQFP100, TQFP-100
GS84032T-166 GSI

获取价格

256K x 18, 128K x 32, 128K x 36 4Mb Sync Burst SRAMs
GS84032T-166I GSI

获取价格

256K x 18, 128K x 32, 128K x 36 4Mb Sync Burst SRAMs
GS84032T-166IT ETC

获取价格

x32 Fast Synchronous SRAM
GS84032T-180 GSI

获取价格

256K x 18, 128K x 32, 128K x 36 4Mb Sync Burst SRAMs
GS84032T-180I GSI

获取价格

256K x 18, 128K x 32, 128K x 36 4Mb Sync Burst SRAMs
GS84032T-180T ETC

获取价格

x32 Fast Synchronous SRAM
GS84036AB-100 GSI

获取价格

256K x 18, 128K x 32, 128K x 36 4Mb Sync Burst SRAMs
GS84036AB-100I GSI

获取价格

256K x 18, 128K x 32, 128K x 36 4Mb Sync Burst SRAMs